Can an RTO still enrol new students in CUF30307?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 15 January 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CUF30307?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CUF30307 Certificate III in Scenery and Set Construction

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CUF30307Superseded — not equivalentCertificate III in Scenery and Set Construction
not equivalent
CUA30415Superseded — not equivalentCertificate III in Live Production and Services
not equivalent
CUA30420Superseded — not equivalentCertificate III in Live Production and Technical Services
not equivalent
CUA30425CurrentCertificate III in Live Production and Technical Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CUE30103CUF30307equivalent13 November 2010
The register records this supersession but attaches no note on what changed.
CUF30307CUA30415not equivalent14 January 2016
Updated to meet Standards for Training Packages. Qualifications merged to remove duplication. Core units changed. Unit codes updated.

Official documents on the register

What training.gov.au lists for CUF30307 and for its training package CUF07 (release 1.2), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CUF30307_R1.pdfCUF30307 release 1 · product document · published 20 July 2012
CUF30307_R1.docxCUF30307 release 1 · product document · published 26 November 2024

Is CUF30307 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CUF30307 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CUF30307 is made of

training.gov.au lists 42 units for CUF30307. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 42 listed

Code	Unit	Core or elective	In this product
BSBCRT301A	Develop and extend critical and creative thinking skills	`N/A`	not current
BSBDES301A	Explore the use of colour	`N/A`	not current
BSBDES302A	Explore and apply the creative design process to 2D forms	`N/A`	not current
BSBDES303A	Explore and apply the creative design process to 3D forms	`N/A`	not current
BSBINN201A	Contribute to workplace innovation	`N/A`	not current
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
CPCCCA2001A	Handle carpentry materials	`N/A`	not current
CPCCCM1005A	Carry out measurements and calculations	`N/A`	not current
CPCCCM2001A	Read and interpret plans and specifications	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CPCCSC2002A	Erect and dismantle basic scaffolding	`N/A`	not current
CPCCSF2001A	Handle steelfixing materials	`N/A`	not current
CUEIND01C	Source and apply entertainment industry knowledge	`N/A`	not current
CUEPRP02B	Research, obtain and prepare props	`N/A`	not current
CUEPRP03B	Apply a general knowledge of props construction	`N/A`	not current
CUEPRP04B	Use casting and moulding techniques to make props	`N/A`	not current
CUEPRP05B	Make prop furniture	`N/A`	not current
CUEPRP06B	Construct mechanical props	`N/A`	not current
CUEPRP07B	Make props using mixed media	`N/A`	not current
CUESCE06B	Use scenic art painting techniques	`N/A`	not current
CUESCE07B	Create special effects for scenic art	`N/A`	not current
CUESET05C	Apply set construction techniques	`N/A`	not current
CUESET09B	Construct soft scenery	`N/A`	not current
CUESET10B	Construct mechanical sets	`N/A`	not current
CUESET302A	Make sets	`N/A`	not current
CUESTA01C	Install staging elements	`N/A`	not current
CUESTA06B	Apply a general knowledge of theatrical rigging	`N/A`	not current
CUFIND301B	Work effectively in the screen and media industries	`N/A`	not current
CUFPRP201A	Repair, maintain and alter props	`N/A`	not current
CUFPRP301A	Assemble and maintain props	`N/A`	not current

Show the remaining 12 units

Code	Unit	Core or elective	In this product
CUFSCE201A	Prepare and prime scenic art cloths	`N/A`	not current
CUFSCE202A	Repair, maintain and alter scenic art	`N/A`	not current
CUFSET301A	Assemble and maintain sets	`N/A`	not current
CUFSFX301A	Maintain and repair special effects items	`N/A`	not current
CUSOHS301A	Follow occupational health and safety procedures	`N/A`	not current
CUVCOR08B	Produce drawings to represent and communicate the concept	`N/A`	not current
CUVCRS03B	Produce computer-aided drawings	`N/A`	not current
CUVCRS04B	Produce technical drawings	`N/A`	not current
CUVCRS06B	Make scale models	`N/A`	not current
HLTFA301B	Apply first aid	`N/A`	not current
LMTCL2004B	Sew components	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CUF training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CUF30307 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.