FBP31018 Certificate III in Sugar Milling Industry Operations

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in FBP31018 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for FBP31018, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
FBP — Food, Beverage and Pharmaceutical
Currency period ends
18 April 2022
Latest release
Release 1 · 18 December 2018
Supersedes
FDF31012
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from FBP31018. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FDF31012FBP31018equivalent17 December 2018

    Updated to meet Standards for Training Packages Packaging rules amended Imported units updated or deleted

Official documents on the register

What training.gov.au lists for FBP31018 and for its training package FBP (release 8.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is FBP31018 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FBP31018 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FBP31018 is made of

training.gov.au lists 59 units for FBP31018: 3 core and 56 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 3 listed

CodeUnitIn this product
BSBWHS201Contribute to health and safety of self and othersnot current
FBPSUG3008Analyse and convey workplace informationcurrent
MSMENV272Participate in environmentally sustainable work practicescurrent

Elective units 56 listed

CodeUnitIn this product
CPCCDO3011APerform doggingnot current
CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industrynot current
CPCCRI3012APerform basic riggingnot current
CPCCSC2002AErect and dismantle basic scaffoldingnot current
FBPOPR2034Operate an evaporation processnot current
FBPOPR2068Operate a process control interfacecurrent
FBPPPL3004Lead work teams and groupscurrent
FBPSUG2001Lay sleepers for cane rail systemsnot current
FBPSUG2002Lay rails for cane rail systemsnot current
FBPSUG2003Lay skeleton track for cane rail systemnot current
FBPSUG2004Operate tamping equipmentnot current
FBPSUG2005Construct turnoutsnot current
FBPSUG2006Collect and prepare samplesnot current
FBPSUG2007Conduct cane weighbridge operationsnot current
FBPSUG2008Operate a tipping stationnot current
FBPSUG2009Operate an extraction stationnot current
FBPSUG2010Operate a juice clarification processnot current
FBPSUG2011Operate a mud filtration processnot current
FBPSUG2012Chemically clean equipmentnot current
FBPSUG2013Operate a pan stationnot current
FBPSUG2014Operate a low grade fugal stationnot current
FBPSUG2015Operate a high grade fugal stationnot current
FBPSUG2016Operate a crystalliser station processnot current
FBPSUG2017Undertake simple fabricationnot current
FBPSUG2018Undertake forming, bending and shapingnot current
FBPSUG2019Operate a bagasse fuel supply systemnot current
FBPSUG2020Operate a coal fuel supply systemnot current
FBPSUG2021Operate an ash separation systemnot current
FBPSUG2022Operate a waste water treatment systemcurrent
FBPSUG2023Operate a cooling water systemnot current
Show the remaining 26 elective units
CodeUnitIn this product
FBPSUG2024Perform standard tests on cane samplescurrent
FBPSUG2025Perform general planing and shaping operationsnot current
FBPSUG2026Perform general drilling operationsnot current
FBPSUG2027Perform general lathe operationsnot current
FBPSUG2028Perform general milling operationsnot current
FBPSUG3001Drive a cane locomotivenot current
FBPSUG3002Control cane traffic movementsnot current
FBPSUG3003Adjust cane delivery schedules to meet daily milling requirementsnot current
FBPSUG3004Drive a master-slave locomotivenot current
FBPSUG3005Operate a sugar systemnot current
FBPSUG3006Monitor a sugar mill powerhousenot current
FBPSUG3007Perform factory control testscurrent
MSMBLIC001Licence to operate a standard boilercurrent
MSMBLIC002Licence to operate an advanced boilercurrent
RIICBM305DInstall pre-cast concrete bridge decksnot current
RIIHAN305DOperate a gantry or overhead cranecurrent
RIIMPO319EConduct backhoe/loader operationsnot current
TLID3035Operate a boom type elevating work platformcurrent
TLID3036Lift and move load using a mobile cranecurrent
TLILIC0003Licence to operate a forklift truckcurrent
TLILIC0008Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)not current
TLILIC2014Licence to drive a light rigid vehiclecurrent
TLILIC2015Licence to drive a medium rigid vehiclecurrent
TLILIC2016Licence to drive a heavy rigid vehiclecurrent
TLILIC3017Licence to drive a heavy combination vehiclecurrent
UEPOPL001Licence to operate a steam turbinenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FBP training product on the register · Search all training products

Take this with you — one email with how the register lists FBP31018 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is FBP31018 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.