FPP20210 Certificate II in Papermaking Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for FPP20210 ended on 4 May 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 6 May 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
FPP10 — Pulp & Paper Manufacturing Industry Training Package
Currency period ends
4 May 2016
Latest release
Release 3 · 1 May 2015 · 3 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
PPM20216 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. FPP20210Superseded — equivalentCertificate II in Papermaking Operations
  2. equivalent
  3. PPM20216Superseded — not equivalentCertificate II in Papermaking Operations
  4. not equivalent
  5. PPM20121CurrentCertificate II in Pulp and Paper Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FPP20210PPM20216equivalent5 May 2016

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for FPP20210 and for its training package FPP10 (release 1.3), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • FPP20210_R3.pdfFPP20210 release 3 · product document · published 1 May 2015
  • FPP20210_R3.docxFPP20210 release 3 · product document · published 26 November 2024

Is FPP20210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FPP20210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FPP20210 is made of

training.gov.au lists 78 units for FPP20210: 2 core and 76 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 2 listed

CodeUnitIn this product
FPPQAS210AApply basic quality practicesnot current
MSAPMSUP101AClean workplace or equipmentnot current

Elective units 76 listed

CodeUnitIn this product
BSBCMM101AApply basic communication skillsnot current
BSBCMM201ACommunicate in the workplacenot current
BSBWRK402AEmpower workersnot current
BSBWRK403ACommunicate with workersnot current
BSBWRK409APrepare for and participate in dispute resolutionnot current
CPPSEC2011BControl access to and exit from premisesnot current
CPPSEC2015APatrol premisesnot current
FPPCPP210AMonitor and control coated paper processesnot current
FPPCPR210APrepare chemical productsnot current
FPPCSK310AOperate process control equipmentnot current
FPPDEO210AMonitor and control dry end operationsnot current
FPPENV210AIdentify and monitor environmental discharges/emissionsnot current
FPPEPG210AMonitor and control power generation systemnot current
FPPFCO210AMonitor, control and shutdown finishing and converting operationsnot current
FPPMHV210AOperate overhead cranenot current
FPPNUM210AEstimate and calculate basic datanot current
FPPOHS210AParticipate in OHS processesnot current
FPPOHS310AContribute to OHS processesnot current
FPPPLN210APlan and undertake a routine tasknot current
FPPPRM210AUndertake operator level preventative maintenancenot current
FPPPRM220APerform lubricationnot current
FPPPRS210AIdentify and rectify problems in the workplacenot current
FPPPRV210AOperate ancillary equipmentnot current
FPPPUL250AStore and distribute pulped productnot current
FPPREC210AMonitor and control chemical recovery operationsnot current
FPPREL210AContribute to effective working relationshipsnot current
FPPRES260AReceive materialsnot current
FPPRES270AUnload materialsnot current
FPPSTM210AMonitor and control boiler operationnot current
FPPSUS210AApply sustainable work practices/policiesnot current
Show the remaining 46 elective units
CodeUnitIn this product
FPPWAR250AStore productnot current
FPPWAR255APrepare and dispatch productnot current
FPPWAR280AWarehouse product packagingnot current
FPPWAS210AOperate water systemsnot current
FPPWEO210AMonitor and control wet end operationsnot current
HLTAID003Provide first aidnot current
MEM09002BInterpret technical drawingnot current
MEM11016BOrder materialsnot current
MEM12023APerform engineering measurementsnot current
MEM12024APerform computationsnot current
MEM14005APlan a complete activitynot current
MEM18001CUse hand toolsnot current
MEM18002BUse power tools/hand held operationsnot current
MEM18055BDismantle, replace and assemble engineering componentsnot current
MSACMS401AEnsure process improvements are sustainednot current
MSACMT270AUse sustainable energy practicesnot current
MSACMT271AUse sustainable environmental practicesnot current
MSAPMOHS110AFollow emergency response proceduresnot current
MSAPMOHS220AProvide initial First Aid responsecurrent
MSAPMOPS212AUse organisation computers or data systemsnot current
MSL904001APerform standard calibrationsnot current
MSL973001APerform basic testsnot current
MSS402020AApply quick changeover proceduresnot current
MSS402030AApply cost factors to work practicesnot current
MSS402040AApply 5S proceduresnot current
MSS402050AMonitor process capabilitynot current
MSS402081AContribute to the application of a proactive maintenance strategynot current
MSS403032AAnalyse manual handling processesnot current
MSS403051AMistake proof an operational processnot current
PMAOHS211BPrepare equipment for emergency responsenot current
TAEASS301BContribute to assessmentnot current
TAEDEL301AProvide work skill instructionnot current
TLIA2012APick and process ordersnot current
TLIA2022AParticipate in stocktakesnot current
TLIA3016AUse inventory systems to organise stock controlnot current
TLID1001AShift materials safely using manual handling methodsnot current
TLID1002AShift a load using manually-operated equipmentnot current
TLID2003AHandle dangerous goods/hazardous substancesnot current
TLID2004ALoad and unload goods/cargonot current
TLID2010AOperate a forkliftnot current
TLID2013AMove materials mechanically using automated equipmentnot current
TLID2047APrepare cargo for transfer with slingsnot current
TLID3011AConduct specialised forklift operationsnot current
TLID3024AUse specialised liquid bulk transfer equipment (gravity/pressurised)not current
TLID3031ARig loadnot current
TLID3035AOperate a boom type elevating work platformnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is FPP20210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.