When must new enrolments into ICP20810 stop?

New enrolments are not permitted from 26 March 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in ICP20810?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICP20810 Certificate II in Printing and Graphic Arts (Cartons)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICP20810Superseded — equivalentCertificate II in Printing and Graphic Arts (Cartons)
equivalent
ICP20115Superseded — not equivalentCertificate II in Printing and Graphic Arts (General)
not equivalent
ICP20120CurrentCertificate II in Printing and Graphic Arts

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP20805ICP20810equivalent4 July 2010
The register records this supersession but attaches no note on what changed.
ICP20810ICP20115equivalent25 March 2015
Updated to meet Standards for Training Packages 11 qualifications merged into one to allow more flexibility

Is ICP20810 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP20810 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP20810 is made of

training.gov.au lists 55 units for ICP20810. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 55 listed

Code	Unit	Core or elective	In this product
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
ICPCF2104C	Set up single-faced web	`N/A`	not current
ICPCF2106C	Set up double-faced web	`N/A`	not current
ICPCF2108C	Produce basic folded and glued cartons	`N/A`	not current
ICPCF220C	Produce basic converted or finished product	`N/A`	not current
ICPCF221C	Set up and produce basic guillotined product	`N/A`	not current
ICPCF231C	Set up machine for basic flat-bed cutting	`N/A`	not current
ICPCF232C	Produce basic flat-bed cut product	`N/A`	not current
ICPCF235C	Set up machine for basic rotary cutting	`N/A`	not current
ICPCF236C	Produce basic rotary cut product	`N/A`	not current
ICPCF241C	Set up machine for basic single or continuous folding	`N/A`	not current
ICPCF242C	Produce basic single or continuous folded product	`N/A`	not current
ICPCF261C	Set up machine for basic adhesive, mechanical or thermal fastening	`N/A`	not current
ICPCF262C	Produce basic adhesive, mechanical or thermal fastened product	`N/A`	not current
ICPCF281C	Set up machine for basic laminating	`N/A`	not current
ICPCF282C	Produce basic laminated product	`N/A`	not current
ICPCF3105C	Produce single-faced web	`N/A`	not current
ICPCF3107C	Produce double-faced web	`N/A`	not current
ICPCF311C	Prepare for cutting forme and stripper making	`N/A`	not current
ICPCF312C	Set cutting forme and strippers	`N/A`	not current
ICPPP268C	Make photopolymer plates (flexographic)	`N/A`	not current
ICPPP281C	Design basic carton	`N/A`	not current
ICPPR211C	Mount and proof flexographic plates for basic printing	`N/A`	not current
ICPPR261C	Set up for foil stamping	`N/A`	not current
ICPPR262C	Produce foil stamped product	`N/A`	not current
ICPPR271C	Set up for basic coating	`N/A`	not current
ICPPR272C	Produce basic coated product	`N/A`	not current
ICPPR313C	Set up for basic flexographic printing	`N/A`	not current
ICPSU201C	Prepare, load and unload reels and cores on and off machine	`N/A`	not current
ICPSU202C	Prepare, load and unload product on and off machine	`N/A`	not current

Show the remaining 25 units

Code	Unit	Core or elective	In this product
ICPSU203C	Prepare and maintain the work area	`N/A`	not current
ICPSU207C	Prepare machine for operation (basic)	`N/A`	not current
ICPSU208C	Operate and monitor machines (basic)	`N/A`	not current
ICPSU211C	Prepare ink and additives	`N/A`	not current
ICPSU212C	Prepare coatings and adhesives	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU221C	Pack and dispatch product	`N/A`	not current
ICPSU222C	Pack and dispatch solid waste	`N/A`	not current
ICPSU224C	Perform basic machine maintenance	`N/A`	not current
ICPSU235C	Lift loads mechanically	`N/A`	not current
ICPSU236C	Shift loads mechanically	`N/A`	not current
ICPSU241C	Undertake warehouse or stores materials processing	`N/A`	not current
ICPSU260C	Maintain a safe work environment	`N/A`	not current
ICPSU261C	Follow OHS practices and identify environmental hazards	`N/A`	not current
ICPSU262C	Communicate in the workplace	`N/A`	not current
ICPSU263C	Perform basic industry calculations	`N/A`	not current
ICPSU271C	Provide basic instruction for a task	`N/A`	not current
ICPSU281C	Use computer systems	`N/A`	not current
ICPSU323C	Dispose of waste	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Is ICP20810 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.