ICPCF312C Set cutting forme and strippers

Supersededtraining.gov.au: supersededEquivalent

The currency period for ICPCF312C ended on 24 March 2015 — 11 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 26 March 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
ICP10 — Printing and Graphic Arts
Currency period ends
24 March 2015
Latest release
Release 1 · 5 July 2010
Supersedes
ICPCF312B
Superseded by
ICPCBF312 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. ICPCF312CSuperseded — equivalentSet cutting forme and strippers
  2. equivalent
  3. ICPCBF312Deleted from the registerSet cutting forme and strippers

The register does not list a current endpoint for this chain: ICPCBF312 is the last product it points at, and ICPCBF312 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

Is ICPCF312C on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICPCF312C sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where ICPCF312C is used

training.gov.au lists ICPCF312C inside 3 training products, none of them current. Every one of them is below, with the register's own core or elective flag for ICPCF312C in that product.

Products no longer current 3 listed

The register still records ICPCF312C inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeICPCF312C is
ICP20810Certificate II in Printing and Graphic Arts (Cartons)Qualificationelective
ICP30710Certificate III in Printing and Graphic Arts (Print Finishing)Qualificationelective
ICP30712Certificate III in Printing and Graphic Arts (Print Finishing)Qualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Is ICPCF312C still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.