When must new enrolments into ICP30712 stop?

New enrolments are not permitted from 26 March 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in ICP30712?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICP30712 Certificate III in Printing and Graphic Arts (Print Finishing)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICP30712Superseded — equivalentCertificate III in Printing and Graphic Arts (Print Finishing)
equivalent
ICP30715Superseded — equivalentCertificate III in Printing and Graphic Arts (Print Finishing)
equivalent
ICP31315Superseded — not equivalentCertificate III in Print Manufacturing
not equivalent
ICP31320CurrentCertificate III in Print Binding, Finishing and Packaging

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP30710ICP30712equivalent7 July 2012
Core unit BSBSUS301A Implement and monitor environmentally sustainable work practices replaced with BSBSUS201A Participate in environmentally sustainable work practices. OUTCOMES DEEMED EQUIVALENT.
ICP30712ICP30715equivalent25 March 2015
Updated to meet Standards for Training Packages

Is ICP30712 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP30712 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP30712 is made of

training.gov.au lists 64 units for ICP30712. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 64 listed

Code	Unit	Core or elective	In this product
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
ICPCF221C	Set up and produce basic guillotined product	`N/A`	not current
ICPCF241C	Set up machine for basic single or continuous folding	`N/A`	not current
ICPCF242C	Produce basic single or continuous folded product	`N/A`	not current
ICPCF243C	Set up machine for basic collating or inserting (sheet/section)	`N/A`	not current
ICPCF244C	Produce basic collated or inserted (sheet/section) product	`N/A`	not current
ICPCF3103C	Run and monitor envelope manufacturing machines	`N/A`	not current
ICPCF3105C	Produce single-faced web	`N/A`	not current
ICPCF3107C	Produce double-faced web	`N/A`	not current
ICPCF311C	Prepare for cutting forme and stripper making	`N/A`	not current
ICPCF312C	Set cutting forme and strippers	`N/A`	not current
ICPCF320C	Produce complex converted or finished product	`N/A`	not current
ICPCF321C	Set up and produce complex guillotined product	`N/A`	not current
ICPCF326C	Undertake pre make-ready for die cutting	`N/A`	not current
ICPCF327C	Set up machine for complex rotary die cutting or embossing	`N/A`	not current
ICPCF341C	Set up machine for complex sequenced or multiple folding	`N/A`	not current
ICPCF342C	Produce complex sequenced or multiple folded product	`N/A`	not current
ICPCF343C	Set up machine for complex collating or inserting (sheet/section/reel)	`N/A`	not current
ICPCF344C	Produce complex collated or inserted (sheet/section/reel) product	`N/A`	not current
ICPCF361C	Set up machine for complex adhesive, mechanical or sewn fastening	`N/A`	not current
ICPCF362C	Produce complex adhesive, mechanical or sewn fastened product	`N/A`	not current
ICPCF369C	Set up and produce hand-made box	`N/A`	not current
ICPCF371C	Decorate paper	`N/A`	not current
ICPCF381C	Set up machine for complex laminating	`N/A`	not current
ICPCF382C	Produce complex laminated product	`N/A`	not current
ICPCF391C	Use electronic monitoring systems (converting and finishing)	`N/A`	not current
ICPCF392C	Produce product on window gluer	`N/A`	not current
ICPCF393C	Set up machine for envelope manufacture	`N/A`	not current
ICPCF395C	Set up and operate folder gluer machine	`N/A`	not current
ICPCF396C	Set up in-line scoring, folding and gluing machine for envelope manufacture	`N/A`	not current

Show the remaining 34 units

Code	Unit	Core or elective	In this product
ICPCF465C	Set up and produce hand-bound book	`N/A`	not current
ICPKN313C	Apply knowledge and requirements of the converting, binding and finishing sector	`N/A`	not current
ICPPR261C	Set up for foil stamping	`N/A`	not current
ICPPR262C	Produce foil stamped product	`N/A`	not current
ICPPR271C	Set up for basic coating	`N/A`	not current
ICPPR272C	Produce basic coated product	`N/A`	not current
ICPPR282C	Produce and manage basic digital print	`N/A`	not current
ICPPR382C	Produce and manage complex digital print	`N/A`	not current
ICPSU202C	Prepare, load and unload product on and off machine	`N/A`	not current
ICPSU203C	Prepare and maintain the work area	`N/A`	not current
ICPSU207C	Prepare machine for operation (basic)	`N/A`	not current
ICPSU208C	Operate and monitor machines (basic)	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU224C	Perform basic machine maintenance	`N/A`	not current
ICPSU260C	Maintain a safe work environment	`N/A`	not current
ICPSU262C	Communicate in the workplace	`N/A`	not current
ICPSU263C	Perform basic industry calculations	`N/A`	not current
ICPSU321C	Pack and dispatch (advanced)	`N/A`	not current
ICPSU323C	Dispose of waste	`N/A`	not current
ICPSU342C	Undertake inventory procedures	`N/A`	not current
ICPSU345C	Purchase materials and schedule deliveries	`N/A`	not current
ICPSU351C	Undertake basic production scheduling	`N/A`	not current
ICPSU352C	Plan operational processes	`N/A`	not current
ICPSU357C	Apply quick changeover procedures	`N/A`	not current
ICPSU362C	Communicate as part of a work team	`N/A`	not current
ICPSU554C	Manage teams	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Is ICP30712 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.