Can an RTO still enrol new students in ICP40410?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 26 March 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in ICP40410?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICP40410 Certificate IV in Printing and Graphic Arts (Print Finishing)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICP40410Superseded — not equivalentCertificate IV in Printing and Graphic Arts (Print Finishing)
not equivalent
ICP40115Superseded — not equivalentCertificate IV in Printing and Graphic Arts
not equivalent
ICP40120CurrentCertificate IV in Printing and Graphic Arts Management

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP40405ICP40410equivalent4 July 2010
The register records this supersession but attaches no note on what changed.
ICP40410ICP40115not equivalent25 March 2015
Number of units increased from 8 to 10

Official documents on the register

What training.gov.au lists for ICP40410 and for its training package ICP10 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

ICP40410_R2.docxICP40410 release 2 · product document · published 26 November 2024
ICP40410_R2.pdfICP40410 release 2 · product document · published 24 July 2012

Is ICP40410 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP40410 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP40410 is made of

training.gov.au lists 34 units for ICP40410. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 34 listed

Code	Unit	Core or elective	In this product
BSBCUS401B	Coordinate implementation of customer service strategies	`N/A`	not current
BSBMGT402A	Implement operational plan	`N/A`	not current
BSBMGT403A	Implement continuous improvement	`N/A`	not current
BSBSUS501A	Develop workplace policy and procedures for sustainability	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
BSBWOR404B	Develop work priorities	`N/A`	not current
ICPCF3103C	Run and monitor envelope manufacturing machines	`N/A`	not current
ICPCF391C	Use electronic monitoring systems (converting and finishing)	`N/A`	not current
ICPCF406C	Set up and load in-line smart card machine	`N/A`	not current
ICPCF407C	Operate a smart card machine and pack product	`N/A`	not current
ICPCF465C	Set up and produce hand-bound book	`N/A`	not current
ICPCF467C	Restore books	`N/A`	not current
ICPPP430C	Manage colour	`N/A`	not current
ICPPP484C	Set up and operate automated workflow	`N/A`	not current
ICPPR384A	Set up and produce basic digital print	`N/A`	not current
ICPPR491C	Use on-press monitoring of print quality	`N/A`	not current
ICPPR492C	Use on-press print control devices	`N/A`	not current
ICPPR493C	Set up and monitor in-line printing operations	`N/A`	not current
ICPPR496A	Set up and produce complex digital print	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU456C	Control production	`N/A`	not current
ICPSU458C	Monitor production workflow	`N/A`	not current
ICPSU464C	Provide customer service and education	`N/A`	not current
ICPSU482C	Troubleshoot and optimise materials and machinery	`N/A`	not current
ICPSU485C	Implement a Just-in-Time (JIT) system	`N/A`	not current
ICPSU486C	Mistake proof a production process	`N/A`	not current
ICPSU487C	Analyse manual handling processes	`N/A`	not current
ICPSU488C	Ensure process improvements are sustained	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current

Show the remaining 4 units

Code	Unit	Core or elective	In this product
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
TAEASS402B	Assess competence	`N/A`	not current
TAEDEL402A	Plan, organise and facilitate learning in the workplace	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is ICP40410 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.