ICP40710 Certificate IV in Printing and Graphic Arts (Process Leadership)

Where the register points next

training.gov.au does not publish a supersession path from ICP40710. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP40805ICP40710equivalent4 July 2010
The register records this supersession but attaches no note on what changed.

Is ICP40710 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP40710 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP40710 is made of

training.gov.au lists 43 units for ICP40710. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 43 listed

Code	Unit	Core or elective	In this product
BSBCUS401B	Coordinate implementation of customer service strategies	`N/A`	not current
BSBMGT402A	Implement operational plan	`N/A`	not current
BSBMGT403A	Implement continuous improvement	`N/A`	not current
BSBSUS301A	Implement and monitor environmentally sustainable work practices	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
BSBWOR404B	Develop work priorities	`N/A`	not current
ICPCF391C	Use electronic monitoring systems (converting and finishing)	`N/A`	not current
ICPKN311C	Apply knowledge of the graphic pre-press sector	`N/A`	not current
ICPKN312C	Apply knowledge of printing machining	`N/A`	not current
ICPKN313C	Apply knowledge and requirements of the converting, binding and finishing sector	`N/A`	not current
ICPKN314C	Apply knowledge and requirements of the screen printing sector	`N/A`	not current
ICPKN315C	Apply knowledge and requirements of the multimedia sector	`N/A`	not current
ICPKN316C	Apply knowledge and requirements of paper and printing processes	`N/A`	not current
ICPKN317C	Apply knowledge and requirements of the ink manufacturing sector	`N/A`	not current
ICPKN318C	Apply knowledge and requirements of mail house operations	`N/A`	not current
ICPKN319C	Apply knowledge and processes of converting paper-based products	`N/A`	not current
ICPKN320C	Apply knowledge and requirements of information technology systems in the printing industry	`N/A`	not current
ICPPP430C	Manage colour	`N/A`	not current
ICPPP484C	Set up and operate automated workflow	`N/A`	not current
ICPPR491C	Use on-press monitoring of print quality	`N/A`	not current
ICPPR492C	Use on-press print control devices	`N/A`	not current
ICPPR493C	Set up and monitor in-line printing operations	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU260C	Maintain a safe work environment	`N/A`	not current
ICPSU262C	Communicate in the workplace	`N/A`	not current
ICPSU345C	Purchase materials and schedule deliveries	`N/A`	not current
ICPSU351C	Undertake basic production scheduling	`N/A`	not current
ICPSU389C	Undertake basic root cause analysis	`N/A`	not current
ICPSU455C	Supervise and schedule work of others	`N/A`	not current
ICPSU456C	Control production	`N/A`	not current

Show the remaining 13 units

Code	Unit	Core or elective	In this product
ICPSU458C	Monitor production workflow	`N/A`	not current
ICPSU464C	Provide customer service and education	`N/A`	not current
ICPSU482C	Troubleshoot and optimise materials and machinery	`N/A`	not current
ICPSU485C	Implement a Just-in-Time (JIT) system	`N/A`	not current
ICPSU486C	Mistake proof a production process	`N/A`	not current
ICPSU487C	Analyse manual handling processes	`N/A`	not current
ICPSU488C	Ensure process improvements are sustained	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
TAEASS402B	Assess competence	`N/A`	not current
TAEDEL402A	Plan, organise and facilitate learning in the workplace	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Is ICP40710 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.