ICT30118 Certificate III in Information, Digital Media and Technology

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for ICT30118 ended on 19 July 2020 — 6 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 21 July 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding ICT30120 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
ICT — Information and Communications Technology
Currency period ends
19 July 2020
Latest release
Release 2 · 30 August 2019 · 2 releases in all
Supersedes
ICT30115
Superseded by
ICT30120 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. ICT30118Superseded — not equivalentCertificate III in Information, Digital Media and Technology
  2. not equivalent
  3. ICT30120CurrentCertificate III in Information Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • ICT30115ICT30118equivalent29 January 2019

    Updated due to changes to core units of competency

  • ICT30118ICT30120not equivalent20 July 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for ICT30118 and for its training package ICT (release 9.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is ICT30118 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICT30118 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICT30118 is made of

training.gov.au lists 52 units for ICT30118: 6 core and 46 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
BSBSUS401Implement and monitor environmentally sustainable work practicesnot current
BSBWHS304Participate effectively in WHS communication and consultation processesnot current
ICTICT202Work and communicate effectively in an ICT environmentnot current
ICTICT301Create user documentationnot current
ICTICT302Install and optimise operating system softwarenot current
ICTSAS308Run standard diagnostic testscurrent

Elective units 46 listed

CodeUnitIn this product
BSBEBU401Review and maintain a websitenot current
BSBIPR301Comply with organisational requirements for protection and use of intellectual propertynot current
CUAANM301Create 2D digital animationscurrent
CUAANM302Create 3D digital animationscurrent
CUADIG301Prepare video assetsnot current
CUADIG302Author interactive sequencesnot current
CUADIG304Create visual design componentscurrent
ICPDMT346Incorporate video into multimedia presentationsnot current
ICTBWN302Install optical fibre splitters in fibre distribution hubscurrent
ICTBWN303Install lead-in module and cable for fibre to the premisescurrent
ICTBWN307Use optical measuring instrumentscurrent
ICTBWN308Work safely on live optical fibre installationscurrent
ICTBWN309Perform tests on optical communication system and componentscurrent
ICTCBL219Apply safe technical work practices for cabling registration when configuring an ADSL circuitcurrent
ICTCBL246Install, maintain and modify customer premises communications cabling: ACMA Restricted Rulecurrent
ICTCBL247Install, maintain and modify customer premises communications cabling: ACMA Open Rulecurrent
ICTCBL330Splice and terminate optical fibre cable for telecommunications projectscurrent
ICTGAM301Apply simple modelling techniquesnot current
ICTGAM302Design and apply simple textures to digital artnot current
ICTGAM303Review and apply the principles of animationnot current
ICTICT203Operate application software packagesnot current
ICTICT303Connect internal hardware componentsnot current
ICTICT304Implement system software changesnot current
ICTICT305Identify and use current industry specific technologiesnot current
ICTICT306Migrate to new technologynot current
ICTICT307Customise packaged software applications for clientsnot current
ICTICT308Use advanced features of computer applicationsnot current
ICTICT409Develop macros and templates for clients using standard productsnot current
ICTNWK301Provide network systems administrationnot current
ICTNWK302Determine and action network problemsnot current
Show the remaining 16 elective units
CodeUnitIn this product
ICTNWK303Configure and administer a network operating systemnot current
ICTNWK304Administer network peripheralsnot current
ICTNWK305Install and manage network protocolsnot current
ICTNWK306Evaluate characteristics of cloud computing solutions and servicesnot current
ICTNWK419Identify and use current virtualisation technologiesnot current
ICTPRG301Apply introductory programming techniquesnot current
ICTSAS303Care for computer hardwarenot current
ICTSAS304Provide basic system administrationnot current
ICTSAS305Provide ICT advice to clientscurrent
ICTSAS306Maintain equipment and softwarenot current
ICTSAS307Install, configure and secure a small office or home office networknot current
ICTTEN208Use electrical skills when working with telecommunications networkscurrent
ICTWEB201Use social media tools for collaboration and engagementnot current
ICTWEB302Build simple websites using commercial programsnot current
ICTWEB303Produce digital images for the webnot current
ICTWHS204Follow work health and safety and environmental policy and procedurescurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is ICT30118 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.