ICT50513 Diploma of Telecommunications Planning and Design

Supersededtraining.gov.au: supersededEquivalent

The currency period for ICT50513 ended on 12 January 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 14 January 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
ICT10 — Integrated Telecommunications Training Package
Currency period ends
12 January 2016
Latest release
Release 1 · 7 February 2014
Supersedes
ICT50510
Superseded by
ICT51115 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. ICT50513Superseded — equivalentDiploma of Telecommunications Planning and Design
  2. equivalent
  3. ICT51115Superseded — not equivalentDiploma of Telecommunications Planning and Design
  4. not equivalent
  5. ICT50220CurrentDiploma of Information Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • ICT50510ICT50513equivalent6 February 2014

    Vocational outcomes deemed equivalent. Additional electives included to provide broader choice. Units updated to current versions.

  • ICT50513ICT51115equivalent13 January 2016

    Updated to meet Standards for Training Packages

Official documents on the register

What training.gov.au lists for ICT50513 and for its training package ICT10 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • ICT50513_R1.pdfICT50513 release 1 · product document · published 9 February 2014
  • ICT50513_R1.docxICT50513 release 1 · product document · published 26 November 2024

Is ICT50513 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICT50513 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICT50513 is made of

training.gov.au lists 21 units for ICT50513: 6 core and 15 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
BSBPMG521AManage project integrationnot current
BSBSUS501ADevelop workplace policy and procedures for sustainabilitynot current
ICTNPL5071ADevelop planning strategies for core network designnot current
ICTNPL5096ADevelop planning strategies for access network designnot current
ICTNPL5101AApply service measures and demand forecasting to products and services planningnot current
ICTNPL5154ADevelop planning strategies for building environment designnot current

Elective units 15 listed

CodeUnitIn this product
BSBFIM501AManage budgets and financial plansnot current
FNSORG506APrepare financial forecasts and projectionsnot current
ICTEDU5025ADevelop and deliver training associated with new and modified productsnot current
ICTNPL6029APlan the development and growth of the telecommunications networknot current
ICTPMG5031APrepare a project briefnot current
ICTPMG5039APrepare project specificationsnot current
ICTPMG6033ADevelop a project management plannot current
ICTPRO5026ADevelop training, marketing and sales resources for telecommunications productsnot current
ICTSUS5187AImplement server virtualisation for a sustainable ICT systemnot current
ICTTEN4241ADesign network projectsnot current
ICTTEN4242AConduct site surveys to identify carrier installation requirementsnot current
ICTTEN4243APrepare design drawings and specifications for telecommunications installationsnot current
ICTTEN4244AEstimate and quote for carrier telecommunications equipment installationsnot current
ICTTEN5024AProvide consultancy and technical support in the customer premises equipment sectornot current
ICTTEN5217APlan a wireless mesh networknot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is ICT50513 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.