Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
ICT60110ICT60615≠not equivalent13 January 2016
Updated to meet Standards for Training Packages Changed Packaging Rules and Core Units
ICT60210ICT60615=equivalent13 January 2016
Updated to meet Standards for Training Packages
ICT60615ICT60220≠not equivalent18 January 2021
The register records this supersession but attaches no note on what changed.
Is ICT60615 on your scope?
This page is the register's record of one product. What it cannot tell you is whether ICT60615 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What ICT60615 is made of
training.gov.au lists 37 units for ICT60615: 4 core and 33 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 4 listed
Elective units 33 listed
| Code | Unit | In this product |
|---|---|---|
| BSBDES601 | Manage design realisation | !not current |
| BSBDES602 | Research global design trends | !not current |
| BSBWHS501 | Ensure a safe workplace | !not current |
| BSBWHS504 | Manage WHS risks | ●current |
| ICTNPL601 | Plan the development and growth of the telecommunications network | !not current |
| ICTNPL602 | Forecast service demand | !not current |
| ICTNPL603 | Undertake network performance analysis | !not current |
| ICTNWK502 | Implement secure encryption technologies | !not current |
| ICTNWK503 | Install and maintain valid authentication processes | !not current |
| ICTNWK509 | Design and implement a security perimeter for ICT networks | !not current |
| ICTNWK517 | Determine best-fit topology for a wide area network | !not current |
| ICTNWK518 | Design an enterprise wireless local area network | !not current |
| ICTNWK520 | Design ICT system security controls | !not current |
| ICTOPN601 | Manage optical ethernet transmission | !not current |
| ICTOPN602 | Manage dense wavelength division multiplexing transmission system | !not current |
| ICTOPN603 | Design a dense wavelength division multiplexing system | !not current |
| ICTOPN604 | Analyse optical transmission systems | !not current |
| ICTRFN601 | Monitor the capacity of and recommend changes to the cellular mobile network | !not current |
| ICTRFN602 | Produce and evaluate architecture designs for WiMAX networks | !not current |
| ICTSAS409 | Manage risks involving ICT systems and technology | !not current |
| ICTSAS505 | Review and update disaster recovery and contingency plans | !not current |
| ICTSUS602 | Establish a business case for sustainability and competitive advantage in ICT projects | !not current |
| ICTTEN601 | Undertake qualification testing of new or enhanced equipment and systems | !not current |
| ICTTEN602 | Undertake system administration | !not current |
| ICTTEN603 | Undertake network traffic management | !not current |
| ICTTEN604 | Coordinate fault rectification and restoration of service following network outages | !not current |
| ICTTEN605 | Implement planned network changes with minimal impact to the customer | !not current |
| ICTTEN606 | Manage a common channel signalling network | !not current |
| ICTTEN607 | Analyse and organise repair of highly complex telecommunications network faults | !not current |
| ICTTEN608 | Verify new software and hardware releases | !not current |
Show the remaining 3 elective units
| Code | Unit | In this product |
|---|---|---|
| ICTTEN609 | Produce and evaluate architecture designs for convergent cellular mobile networks | !not current |
| ICTTEN610 | Design and configure an IP-MPLS network with virtual private network tunnelling | !not current |
| ICTTEN612 | Design and manage internet protocol TV in a service provider network | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every ICT training product on the register · Search all training products
Is ICT60615 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.