Can an RTO still enrol new students in LMF30602?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 4 October 2012. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in LMF30602?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMF30602 Certificate III in Glass and Glazing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMF30602Superseded — equivalentCertificate III in Glass and Glazing
equivalent
LMF30611Superseded — not equivalentCertificate III in Glass and Glazing
not equivalent
MSF30413Superseded — equivalentCertificate III in Glass and Glazing
equivalent
MSF30418Superseded — equivalentCertificate III in Glass and Glazing
equivalent
MSF30422CurrentCertificate III in Glass and Glazing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMF30602LMF30611equivalent3 October 2011
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for LMF30602 and for its training package LMF02 (release 8.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

LMF30602_R1.docxLMF30602 release 1 · product document · published 26 November 2024
LMF30602_R1.pdfLMF30602 release 1 · product document · published 20 July 2012

Is LMF30602 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMF30602 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMF30602 is made of

training.gov.au lists 34 units for LMF30602. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 34 listed

Code	Unit	Core or elective	In this product
LMFGG2001B	Use glass and glazing sector hand and power tools	`N/A`	not current
LMFGG2002B	Apply First Aid	`N/A`	not current
LMFGG2003B	Operate glass freefall rack and table	`N/A`	not current
LMFGG2004B	Process thin glass by hand	`N/A`	not current
LMFGG2005B	Move glass sheets by hand	`N/A`	not current
LMFGG2006B	Move single glass sheets by mechanical means	`N/A`	not current
LMFGG2007B	Process glass by basic machines	`N/A`	not current
LMFGG2008B	Glaze/reglaze residential windows and doors	`N/A`	not current
LMFGG2009B	Fabricate and assemble metal frames	`N/A`	not current
LMFGG2010B	Fabricate and install insect and security screens	`N/A`	not current
LMFGG3001B	Store and handle glass	`N/A`	not current
LMFGG3002B	Assess glass and glazing requirements	`N/A`	not current
LMFGG3003B	Move block/bulk glass sheet by mechanical means	`N/A`	not current
LMFGG3004B	Process thick glass by hand	`N/A`	not current
LMFGG3005B	Process glass by semi-automatic and automatic machines	`N/A`	not current
LMFGG3006B	Apply film to glass	`N/A`	not current
LMFGG3007B	Form glass	`N/A`	not current
LMFGG3008B	Apply patterns and designs to glass	`N/A`	not current
LMFGG3009B	Set up and operate glass laminating equipment	`N/A`	not current
LMFGG3010B	Set up and operate glass toughening equipment	`N/A`	not current
LMFGG3011B	Set up and operate glass silvering equipment	`N/A`	not current
LMFGG3012B	Set up and operate insulated glass unit manufacturing equipment	`N/A`	not current
LMFGG3013B	Construct and repair leadlight panels	`N/A`	not current
LMFGG3014B	Prepare and install mirrors	`N/A`	not current
LMFGG3015B	Fabricate and install shower screens and wardrobe doors	`N/A`	not current
LMFGG3016B	Fabricate and install residential windows and doors	`N/A`	not current
LMFGG3017B	Fabricate and install commercial glazing	`N/A`	not current
LMFGG3018B	Prepare and install architectural engineered glazing	`N/A`	not current
LMFGG3019B	Conduct commercial and structural glazing	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current

Show the remaining 4 units

Code	Unit	Core or elective	In this product
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current
MSAPMSUP106A	Work in a team	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMF training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is LMF30602 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.