When must new enrolments into LMF30611 stop?

New enrolments are not permitted from 10 December 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMF30611?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMF30611 Certificate III in Glass and Glazing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMF30611Superseded — not equivalentCertificate III in Glass and Glazing
not equivalent
MSF30413Superseded — equivalentCertificate III in Glass and Glazing
equivalent
MSF30418Superseded — equivalentCertificate III in Glass and Glazing
equivalent
MSF30422CurrentCertificate III in Glass and Glazing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMF30602LMF30611equivalent3 October 2011
The register records this supersession but attaches no note on what changed.
LMF30611MSF30413not equivalent9 December 2013
Not equivalent

Is LMF30611 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMF30611 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMF30611 is made of

training.gov.au lists 61 units for LMF30611. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 61 listed

Code	Unit	Core or elective	In this product
CPCCCM2001A	Read and interpret plans and specifications	`N/A`	not current
CPCCCM2006A	Apply basic levelling procedures	`N/A`	not current
CPCCCM2008A	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2010A	Work safely at heights	`N/A`	not current
CPCCCM3001B	Operate elevated work platforms	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
CUVCOR07B	Use drawing techniques to represent the object or idea	`N/A`	not current
CUVCOR08B	Produce drawings to represent and communicate the concept	`N/A`	not current
CUVVSP01B	Produce calligraphy	`N/A`	not current
CUVVSP14B	Apply techniques to produce drawings	`N/A`	not current
CUVVSP15B	Produce drawings	`N/A`	not current
HLTFA301B	Apply first aid	`N/A`	not current
LMFFM3011B	Produce manual and computer-aided production drawings	`N/A`	not current
LMFFM3033B	Construct jigs and fixtures	`N/A`	not current
LMFGG2001C	Use glass and glazing sector hand and power tools	`N/A`	not current
LMFGG2003C	Operate glass freefall rack and table	`N/A`	not current
LMFGG2004C	Process thin glass by hand	`N/A`	not current
LMFGG2005C	Move glass sheets by hand	`N/A`	not current
LMFGG2007C	Process glass by basic machines	`N/A`	not current
LMFGG2008C	Glaze reglaze residential windows and doors	`N/A`	not current
LMFGG2009C	Fabricate and assemble metal frames	`N/A`	not current
LMFGG2010C	Fabricate and install insect and security screens	`N/A`	not current
LMFGG2011A	Use, handle and store glass and glazing products and consumables	`N/A`	not current
LMFGG3001C	Store and handle glass	`N/A`	not current
LMFGG3002C	Assess glass and glazing requirements	`N/A`	not current
LMFGG3003C	Move block bulk glass sheet by mechanical means	`N/A`	not current
LMFGG3004C	Process thick glass	`N/A`	not current
LMFGG3005C	Process glass by semi-automatic and automatic machines	`N/A`	not current
LMFGG3006C	Apply and handle films and coated glass	`N/A`	not current

Show the remaining 31 units

Code	Unit	Core or elective	In this product
LMFGG3007C	Form glass	`N/A`	not current
LMFGG3008C	Apply patterns and designs to glass	`N/A`	not current
LMFGG3009C	Set up and operate glass laminating equipment	`N/A`	not current
LMFGG3010C	Set up and operate glass toughening equipment	`N/A`	not current
LMFGG3011C	Set up and operate glass silvering equipment	`N/A`	not current
LMFGG3012C	Set up and operate insulated glass unit manufacturing equipment	`N/A`	not current
LMFGG3013C	Construct and repair leadlight panels	`N/A`	not current
LMFGG3015C	Fabricate and install shower screens and wardrobe doors	`N/A`	not current
LMFGG3016C	Fabricate and install residential windows and doors	`N/A`	not current
LMFGG3017C	Fabricate and install commercial glazing	`N/A`	not current
LMFGG3018C	Prepare and install architectural engineered glazing	`N/A`	not current
LMFGG3019C	Conduct commercial and structural re-glazing	`N/A`	not current
LMFGG3020A	Use static machines for aluminium and uPVC chloride fabrication	`N/A`	not current
LMFGG3021A	Prepare and install mirrors and glass splashbacks	`N/A`	not current
LMFGN3001B	Read and interpret work documents	`N/A`	not current
LMFGN3002B	Estimate and cost job	`N/A`	not current
LMFSL2001B	Assemble leadlight and stained glass components	`N/A`	not current
LMFSL3001B	Apply product and material knowledge to leadlight and stained glass operations	`N/A`	not current
LMFSL3004B	Protect stained glass and leadlighting	`N/A`	not current
LMFSL3005B	Fabricate and install residential leadlight and stained glass windows and doors	`N/A`	not current
LMFSL3006B	Prepare and install architectural engineered leadlight and stained glass	`N/A`	not current
LMFSL3007A	Paint and fire glass	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09009C	Create 2D drawings using computer aided design system	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current
MSAPMSUP106A	Work in a team	`N/A`	not current
TLID307D	Handle dangerous goods/hazardous substances	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMF training product on the register · Search all training products

Is LMF30611 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.