MEA116B Apply occupational health and safety procedures at supervisor level in aviation maintenance

deletedthe status token training.gov.au records

Item 14

The one year of s 14(1)(c), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in MEA116B today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for MEA116B, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Unit of competency
Training package
MEA07 — Aeroskills Training Package
Currency period ends
10 February 2015
Latest release
Release 2 · 23 January 2012 · 2 releases in all
Supersedes
MEA116A
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from MEA116B. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEA116AMEA116Bequivalent16 November 2010

    Descriptor and Range Statement revised to also include Certificate IV training pathways that lead to employment as a supervisor - units are equivalent

Official documents on the register

What training.gov.au lists for MEA116B and for its training package MEA07 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • MEA116B_R2.pdfMEA116B release 2 · product document · published 5 October 2012
  • MEA116B_R2.docxMEA116B release 2 · product document · published 26 November 2024

Is MEA116B on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEA116B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MEA116B is used

training.gov.au lists MEA116B inside 15 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MEA116B in that product.

Products no longer current 15 listed

The register still records MEA116B inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMEA116B is
MEA40910Certificate IV in Aircraft Surface FinishingQualificationelective
MEA40911Certificate IV in Aircraft Surface FinishingQualificationelective
MEA41011Certificate IV in Aeroskills (Mechatronics)Qualificationelective
MEA41110Certificate IV in Aircraft Life Support and FurnishingQualificationelective
MEA41111Certificate IV in Aircraft Life Support and FurnishingQualificationelective
MEA50110Diploma of Aeroskills (Avionics)Qualificationelective
MEA50111Diploma of Aeroskills (Avionics)Qualificationelective
MEA50210Diploma of Aeroskills (Mechanical)Qualificationelective
MEA50211Diploma of Aeroskills (Mechanical)Qualificationelective
MEA50310Diploma of Aviation Maintenance Management (Avionics)Qualificationelective
Show the remaining 5 products no longer current
CodeTraining productTypeMEA116B is
MEA50311Diploma of Aviation Maintenance Management (Avionics)Qualificationelective
MEA50410Diploma of Aviation Maintenance Management (Mechanical)Qualificationelective
MEA50411Diploma of Aviation Maintenance Management (Mechanical)Qualificationelective
MEA50511Diploma of Aeroskills (Non-Destructive Testing)Qualificationelective
MEA60311Advanced Diploma of Aviation Non-Destructive TestingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEA training product on the register · Search all training products

Take this with you — one email with how the register lists MEA116B today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MEA116B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.