MEA50210 Diploma of Aeroskills (Mechanical)

Supersededtraining.gov.au: supersededEquivalent

The currency period for MEA50210 ended on 21 January 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 23 January 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
MEA07 — Aeroskills Training Package
Currency period ends
21 January 2012
Latest release
Release 1 · 15 November 2010
Supersedes
MEA50207
Superseded by
MEA50211 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MEA50210Superseded — equivalentDiploma of Aeroskills (Mechanical)
  2. equivalent
  3. MEA50211Superseded — equivalentDiploma of Aeroskills (Mechanical)
  4. equivalent
  5. MEA50215Superseded — equivalentDiploma of Aeroskills (Mechanical)
  6. equivalent
  7. MEA50218Superseded — not equivalentDiploma of Aeroskills (Mechanical)
  8. not equivalent
  9. MEA50219CurrentDiploma of Aeroskills (Mechanical)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEA50207MEA50210not equivalent16 November 2010

    The register records this supersession but attaches no note on what changed.

  • MEA50210MEA50211equivalent22 January 2012

    The register records this supersession but attaches no note on what changed.

Is MEA50210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEA50210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEA50210 is made of

training.gov.au lists 49 units for MEA50210. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 49 listed

CodeUnitCore or electiveIn this product
MEA101BInterpret occupational health and safety practices in aviation maintenanceN/Anot current
MEA103BPlan and organise aviation maintenance work activitiesN/Anot current
MEA105BApply quality standards applicable to aviation maintenance processesN/Anot current
MEA107BInterpret and use aviation maintenance industry manuals and specificationsN/Anot current
MEA108BComplete aviation maintenance industry documentationN/Anot current
MEA109BPerform basic hand skills, standard trade practices and fundamentals in aviation maintenanceN/Anot current
MEA111BPerform administrative processes to prepare for certification of civil aircraft maintenanceN/Anot current
MEA112BPlan and implement civil aircraft maintenance activitiesN/Anot current
MEA113CSupervise civil aircraft maintenance activities and manage human resources in the workplaceN/Anot current
MEA116BApply occupational health and safety procedures at supervisor level in aviation maintenanceN/Anot current
MEA118AConduct self in the aviation maintenance environmentN/Anot current
MEA201BRemove and install miscellaneous aircraft electrical hardware/componentsN/Anot current
MEA203CRemove and install advanced aircraft electrical system componentsN/Anot current
MEA208CRemove and install aircraft pressurisation control system componentsN/Anot current
MEA209CRemove and install aircraft oxygen system componentsN/Anot current
MEA211CInspect, test and troubleshoot advanced aircraft electrical systems and componentsN/Anot current
MEA219CInspect, test and troubleshoot aircraft pressurisation control systems and componentsN/Anot current
MEA222CInspect, test and troubleshoot aircraft oxygen systems and componentsN/Anot current
MEA223CInspect aircraft electrical systems and componentsN/Anot current
MEA227CTest and troubleshoot aircraft electrical systems and componentsN/Anot current
MEA246CFabricate and/or repair aircraft electrical hardware or partsN/Anot current
MEA260BUse electrical test equipmentN/Anot current
MEA301CPerform aircraft flight servicingN/Anot current
MEA302CRemove and install aircraft hydro-mechanical and landing gear system componentsN/Anot current
MEA303CRemove and install aircraft pneumatic system componentsN/Anot current
MEA304CRemove and install non-pressurised aircraft structural and non-structural componentsN/Anot current
MEA305CRemove and install aircraft fixed wing flight control system componentsN/Anot current
MEA306CRemove and install engines and engine system componentsN/Anot current
MEA307CRemove and install propeller systems and componentsN/Anot current
MEA308CRemove and install rotary wing rotor and flight control system componentsN/Anot current
Show the remaining 19 units
CodeUnitCore or electiveIn this product
MEA309CInspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and componentsN/Anot current
MEA310CInspect, test and troubleshoot aircraft pneumatic systems and componentsN/Anot current
MEA312CInspect, test and troubleshoot aircraft fixed wing flight control systems and componentsN/Anot current
MEA313CInspect, test and troubleshoot piston engine systems and componentsN/Anot current
MEA315CInspect, test and troubleshoot propeller systems and componentsN/Anot current
MEA316CInspect, test and troubleshoot rotary wing rotor and control systems and componentsN/Anot current
MEA317CRemove and install pressurised aircraft structural and non-structural componentsN/Anot current
MEA318BInspect aircraft hydro-mechanical, mechanical, gaseous and landing gear systems and componentsN/Anot current
MEA319BInspect gas turbine engine systems and componentsN/Anot current
MEA320BTest and troubleshoot aircraft hydro-mechanical, mechanical, gaseous and landing gear systems and componentsN/Anot current
MEA321BTest and troubleshoot aircraft fixed wing flight control systems and componentsN/Anot current
MEA322BTest and troubleshoot gas turbine engine systems and componentsN/Anot current
MEA323BPerform advanced troubleshooting in aircraft mechanical maintenanceN/Anot current
MEA325BWeigh aircraft and perform aircraft weight and balance calculations as a result of modificationsN/Anot current
MEA328CMaintain and/or repair aircraft mechanical components or partsN/Anot current
MEA339BInspect, repair and maintain aircraft structuresN/Anot current
MEA343BRemove and install avionic system componentsN/Anot current
MEA365AAssess structural repair/modification requirements and evaluate structural repairs and modificationsN/Anot current
MSAENV472BImplement and monitor environmentally sustainable work practicesN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEA training product on the register · Search all training products

Is MEA50210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.