MEA211C Inspect, test and troubleshoot advanced aircraft electrical systems and components

Supersededtraining.gov.au: supersededEquivalent

The currency period for MEA211C ended on 10 February 2015 — 11 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 12 February 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MEA07 — Aeroskills Training Package
Currency period ends
10 February 2015
Latest release
Release 2 · 23 January 2012 · 2 releases in all
Supersedes
MEA211B
Superseded by
MEA211 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MEA211CSuperseded — equivalentInspect, test and troubleshoot advanced aircraft electrical systems and components
  2. equivalent
  3. MEA211Superseded — equivalentInspect, test and troubleshoot advanced aircraft electrical systems and components
  4. equivalent
  5. MEA294CurrentInspect, test and troubleshoot advanced aircraft electrical systems and components

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEA211BMEA211Cequivalent16 November 2010

    Knowledge statements expanded to improve usability in General Aviation Units are equivalent

  • MEA211CMEA211equivalent11 February 2015

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for MEA211C and for its training package MEA07 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • MEA211C_R2.pdfMEA211C release 2 · product document · published 5 October 2012
  • MEA211C_R2.docxMEA211C release 2 · product document · published 26 November 2024

Is MEA211C on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEA211C sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MEA211C is used

training.gov.au lists MEA211C inside 19 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MEA211C in that product.

Products no longer current 19 listed

The register still records MEA211C inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMEA211C is
MEA40610Certificate IV in Aeroskills (Avionics)Qualificationelective
MEA40611Certificate IV in Aeroskills (Avionics)Qualificationelective
MEA41210Certificate IV in Aeroskills (Armament)Qualificationelective
MEA41211Certificate IV in Aeroskills (Armament)Qualificationelective
MEA41213Certificate IV in Aeroskills (Armament)Qualificationelective
MEA50210Diploma of Aeroskills (Mechanical)Qualificationelective
MEA50211Diploma of Aeroskills (Mechanical)Qualificationelective
MEASS00010Airframe - B1.1 Licence Exclusion E15 RemovalSkill setelective
MEASS00011Airframe - B1.1 Licence Exclusion E16 RemovalSkill setelective
MEASS00024Electrical - B1.2, B1.3 or B1.4 Licence Exclusions E1 and E4 RemovalSkill setelective
Show the remaining 9 products no longer current
CodeTraining productTypeMEA211C is
MEASS00039Instrument - B1 Licence Exclusions E5 and E7 RemovalSkill setelective
MEASS00046Instrument and Radio - B1 Licence Exclusion E6 RemovalSkill setelective
MEASS00062Radio - B1 Licence Exclusion E8 RemovalSkill setelective
MEASS00135Airframe - B1.1 Licence Exclusion E15 RemovalSkill setelective
MEASS00136Airframe - B1.1 Licence Exclusion E16 RemovalSkill setelective
MEASS00162Electrical - B1.2, B1.3 or B1.4 Licence Exclusions E1 and E4 RemovalSkill setelective
MEASS00181Instrument - B1 Licence Exclusions E5 and E7 RemovalSkill setelective
MEASS00189Instrument and Radio - B1 Licence Exclusion E6 RemovalSkill setelective
MEASS00215Radio - B1 Licence Exclusion E8 RemovalSkill setelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEA training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MEA211C still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.