When must new enrolments into MEM40412 stop?

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM40412?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM40412 Certificate IV in Engineering Drafting

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM40412Superseded — equivalentCertificate IV in Engineering Drafting
equivalent
MEM40422CurrentCertificate IV in Engineering Drafting

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM40412MEM40422equivalent18 December 2022
The register records this supersession but attaches no note on what changed.

Is MEM40412 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM40412 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM40412 is made of

training.gov.au lists 58 units for MEM40412: 4 core and 0 elective, and 54 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Core units 4 listed

Code	Unit	In this product
MEM16006A	Organise and communicate information	not current
MEM16008A	Interact with computing technology	not current
MEM30012A	Apply mathematical techniques in a manufacturing engineering or related environment	not current
MSAENV272B	Participate in environmentally sustainable work practices	not current

Units the register marks neither core nor elective 54 listed

Code	Unit	Core or elective	In this product
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CPCPCM4002A	Estimate and cost work	`N/A`	not current
FDFOP2005A	Work in a socially diverse environment	`N/A`	not current
LMTGN4002A	Participate in product engineering	`N/A`	not current
MEM05051A	Select welding processes	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09201A	Work effectively in an engineering drafting workplace	`N/A`	not current
MEM09202A	Produce freehand sketches	`N/A`	not current
MEM09203A	Measure and sketch site information	`N/A`	not current
MEM09204A	Produce basic engineering detail drawings	`N/A`	not current
MEM09205A	Produce electrical schematic drawings	`N/A`	not current
MEM09206A	Produce drawings for mechanical services	`N/A`	not current
MEM09207A	Produce drawings for reticulated services	`N/A`	not current
MEM09208A	Detail fasteners and locking devices in mechanical drawings	`N/A`	not current
MEM09209A	Detail bearings, seals and other componentry in mechanical drawings	`N/A`	not current
MEM09210A	Create 3-D solid models using computer-aided design (CAD) system	`N/A`	not current
MEM09211A	Produce drawings or models for industrial piping	`N/A`	not current
MEM09212A	Produce detailed drawings of steel to non-steel connections	`N/A`	not current
MEM09213A	Produce schematic drawings for hydraulic and pneumatic fluid power systems	`N/A`	not current
MEM09216A	Interpret and produce curved 3-D shapes and patterns	`N/A`	not current
MEM09217A	Prepare plans for pipe and duct fabrication	`N/A`	not current
MEM09218A	Participate in drafting projects for building services	`N/A`	not current
MEM09219A	Prepare drawings for fabricated sheet metal products	`N/A`	not current
MEM09220A	Apply surface modelling techniques to 3-D drawings	`N/A`	not current
MEM09221A	Create 3-D model assemblies using computer-aided design (CAD) system	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM16003B	Provide advanced customer service	`N/A`	not current
MEM16014A	Report technical information	`N/A`	not current

Show the remaining 24 units

Code	Unit	Core or elective	In this product
MEM30005A	Calculate force systems within simple beam structures	`N/A`	not current
MEM30006A	Calculate stresses in simple structures	`N/A`	not current
MEM30007A	Select common engineering materials	`N/A`	not current
MEM30008A	Apply basic economic and ergonomic concepts to evaluate engineering applications	`N/A`	not current
MEM30010A	Set up basic hydraulic circuits	`N/A`	not current
MEM30011A	Set up basic pneumatic circuits	`N/A`	not current
MEM30013A	Assist in the preparation of a basic workplace layout	`N/A`	not current
MEM30016A	Assist in the analysis of a supply chain	`N/A`	not current
MEM30019A	Use resource planning software systems in manufacturing	`N/A`	not current
MEM30023A	Prepare a simple cost estimate for a manufactured product	`N/A`	not current
MEM30024A	Participate in quality assurance techniques	`N/A`	not current
MEM30025A	Analyse a simple electrical system circuit	`N/A`	not current
MEM30031A	Operate computer-aided design (CAD) system to produce basic drawing elements	`N/A`	not current
MEM30032A	Produce basic engineering drawings	`N/A`	not current
MEM30033A	Use computer-aided design (CAD) to create and display 3-D models	`N/A`	not current
MSATCS301A	Interpret architectural and engineering design specifications for structural steel detailing	`N/A`	not current
MSATCS302A	Detail bolts and welds for structural steelwork connections	`N/A`	not current
MSATCS501A	Detail standardised structural connections	`N/A`	not current
MSATCS502A	Detail structural steel members	`N/A`	not current
MSATCS504A	Detail ancillary steelwork	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402051A	Apply quality standards	`N/A`	not current
UEPMNT419B	Perform civil drafting	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM40412 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.