Where the register points next
training.gov.au points at nothing after MEM40422: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM40422 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM40422 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM40422 is made of
training.gov.au lists 62 units for MEM40422: 4 core and 58 elective. To complete it, the register publishes a rule of 4 core units plus 11 electives — 15 units in all.
Core units 4 listed
Elective units 58 listed
| Code | Unit | In this product |
|---|---|---|
| CPCPCM4012 | Estimate and cost work | ●current |
| CPCWHS1001 | Prepare to work safely in the construction industry | ●current |
| MEM05085 | Select welding processes | ●current |
| MEM09002 | Interpret technical drawing | ●current |
| MEM09201 | Work effectively in an engineering drafting workplace | ●current |
| MEM09202 | Produce freehand sketches | ●current |
| MEM09203 | Measure and sketch site information | ●current |
| MEM09204 | Produce basic engineering detail drawings | ●current |
| MEM09205 | Produce electrical schematic drawings | ●current |
| MEM09206 | Produce drawings for mechanical services | ●current |
| MEM09207 | Produce drawings for reticulated services | ●current |
| MEM09208 | Detail fasteners and locking devices in mechanical drawings | ●current |
| MEM09209 | Detail bearings, seals and other componentry in mechanical drawings | ●current |
| MEM09210 | Create 3D solid models using computer-aided design (CAD) system | ●current |
| MEM09211 | Produce drawings or models for industrial piping | ●current |
| MEM09212 | Produce detailed drawings of steel to non-steel connections | ●current |
| MEM09213 | Produce schematic drawings for hydraulic and pneumatic fluid power systems | ●current |
| MEM09216 | Interpret and produce curved 3D shapes and patterns | ●current |
| MEM09217 | Prepare plans for pipe and duct fabrication | ●current |
| MEM09218 | Participate in drafting projects for building services | ●current |
| MEM09219 | Prepare drawings for fabricated sheet metal products | ●current |
| MEM09220 | Apply surface modelling techniques to 3D drawings | ●current |
| MEM09221 | Create 3D model assemblies using computer-aided design (CAD) system | ●current |
| MEM09223 | Interpret design specifications for structural steel detailing | ●current |
| MEM09224 | Detail bolts and welds for structural steelwork connections | ●current |
| MEM09225 | Detail standardised structural connections | ●current |
| MEM09226 | Detail structural steel members | ●current |
| MEM09228 | Detail ancillary steelwork | ●current |
| MEM09229 | Read and interpret technical engineering drawings | ●current |
| MEM12023 | Perform engineering measurements | ●current |
Show the remaining 28 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM15001 | Perform basic statistical quality control | ●current |
| MEM16003 | Provide advanced customer service | ●current |
| MEM16014 | Report technical information | ●current |
| MEM30005 | Calculate force systems within simple beam structures | ●current |
| MEM30006 | Calculate stresses in simple structures | ●current |
| MEM30007 | Select common engineering materials | ●current |
| MEM30008 | Apply basic economic and ergonomic concepts to evaluate engineering applications | ●current |
| MEM30010 | Set up basic hydraulic circuits | ●current |
| MEM30011 | Set up basic pneumatic circuits | ●current |
| MEM30013 | Assist in the preparation of a basic workplace layout | ●current |
| MEM30016 | Assist in the analysis of a supply chain | ●current |
| MEM30019 | Use resource planning software systems in manufacturing | ●current |
| MEM30023 | Prepare a simple cost estimate for a manufactured product | ●current |
| MEM30024 | Participate in quality assurance techniques | ●current |
| MEM30025 | Analyse a simple electrical system circuit | ●current |
| MEM30031 | Operate computer-aided design (CAD) system to produce basic drawing elements | ●current |
| MEM30032 | Produce basic engineering drawings | ●current |
| MEM30033 | Use computer-aided design (CAD) to create and display 3D models | ●current |
| MSS402004 | Sustain process improvements | ●current |
| MSS402055 | Apply quality standards | ●current |
| MSS402087 | Apply cost factors to work practices | ●current |
| MSTGN4017 | Participate in product engineering | ●current |
| TLIG2007 | Work in a socially diverse environment | ●current |
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | ●current |
| UEECD0051 | Use drawings, diagrams, schedules, standards, codes and specifications | ●current |
| UEPMNT419 | Perform civil drafting | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM40422 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.