When must new enrolments into MEM50311 stop?

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM50311?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM50311 Diploma of Jewellery and Object Design

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM50311Superseded — equivalentDiploma of Jewellery and Object Design
equivalent
MEM50322CurrentDiploma of Jewellery and Object Design

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM50311MEM50322equivalent18 December 2022
The register records this supersession but attaches no note on what changed.

Is MEM50311 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM50311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM50311 is made of

training.gov.au lists 73 units for MEM50311. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 73 listed

Code	Unit	Core or elective	In this product
BSBCMM401A	Make a presentation	`N/A`	not current
BSBCRT401A	Articulate, present and debate ideas	`N/A`	not current
BSBCRT402A	Collaborate in a creative process	`N/A`	not current
BSBCRT501A	Originate and develop concepts	`N/A`	not current
BSBDES402A	Interpret and respond to a design brief	`N/A`	not current
BSBDES502A	Establish, negotiate and refine a design brief	`N/A`	not current
BSBIPR401A	Use and respect copyright	`N/A`	not current
BSBIPR501A	Manage intellectual property to protect and grow business	`N/A`	not current
BSBPMG522A	Undertake project work	`N/A`	not current
BSBSMB403A	Market the small business	`N/A`	not current
BSBSMB405B	Monitor and manage small business operations	`N/A`	not current
BSBSMB406A	Manage small business finances	`N/A`	not current
CUFIND201A	Develop and apply creative arts industry knowledge	`N/A`	not current
CUFRES401A	Conduct research	`N/A`	not current
CUVACD304A	Make scale models	`N/A`	not current
CUVACD504A	Research and apply light and colour	`N/A`	not current
CUVACD506A	Refine 2-D design ideas and processes	`N/A`	not current
CUVACD507A	Refine 3-D design ideas and processes	`N/A`	not current
CUVACD512A	Work with photomedia in creative practice	`N/A`	not current
CUVDES403A	Research and apply techniques for the design of wearable objects	`N/A`	not current
CUVDIG401A	Experiment with techniques to enhance digital images	`N/A`	not current
CUVDIG501A	Refine digital art techniques	`N/A`	not current
CUVDRA501A	Refine drawing techniques	`N/A`	not current
CUVDRA502A	Investigate drawing materials and processes	`N/A`	not current
CUVGRD301A	Prepare files for publication	`N/A`	not current
CUVJWL401A	Experiment with techniques to produce jewellery	`N/A`	not current
CUVPHI302A	Capture photographic images	`N/A`	not current
CUVPHI403A	Apply photo imaging lighting techniques	`N/A`	not current
CUVPRP403A	Select and organise finished work for storage	`N/A`	not current
CUVPRP405A	Develop and discuss ideas for own creative work	`N/A`	not current

Show the remaining 43 units

Code	Unit	Core or elective	In this product
CUVPRP501A	Realise a body of creative work	`N/A`	not current
CUVPRP502A	Prepare for sustainable professional practice	`N/A`	not current
CUVPRP503A	Present a body of own creative work	`N/A`	not current
CUVRES502A	Analyse cultural history and theory	`N/A`	not current
LMFFDT4012A	Produce ideation drawings	`N/A`	not current
MEM05006C	Perform brazing and or silver soldering	`N/A`	not current
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing	`N/A`	not current
MEM08010B	Manually finish/polish materials	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13004B	Work safely with molten metals/glass	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18003C	Use tools for precision work	`N/A`	not current
MEM19001B	Perform jewellery metal casting	`N/A`	not current
MEM19012B	Produce jewellery wax model	`N/A`	not current
MEM19013B	Produce jewellery metal masters	`N/A`	not current
MEM19023A	Apply drawing and rendering techniques to jewellery or object design	`N/A`	not current
MEM19024A	Use CAD to create and display 3D jewellery and object models	`N/A`	not current
MEM19025A	Create and present designs for jewellery and other 3D objects	`N/A`	not current
MEM19026A	Investigate quality and application of jewellery materials	`N/A`	not current
MEM19027A	Produce life drawings for presenting jewellery and object designs	`N/A`	not current
MEM19028A	Select materials and new technologies for jewellery and 3D object design applications	`N/A`	not current
MEM19029A	Produce a professional jewellery design and 3D object portfolio	`N/A`	not current
MEM19030A	Research and design sustainable objects	`N/A`	not current
MEM19031A	Produce renderings and technical drawings for jewellery and object design construction	`N/A`	not current
MEM19032A	Design and implement mechanisms in jewellery items	`N/A`	not current
MEM19033A	Create silversmithing objects	`N/A`	not current
MEM19034A	Apply chain manufacture process	`N/A`	not current
MEM19035A	Plan and apply casting techniques for jewellery and object designs	`N/A`	not current
MEM19036A	Use specialised techniques to produce jewellery and objects	`N/A`	not current
MEM19037A	Plan and implement chenier fabrication process	`N/A`	not current
MEM19042A	Render images using computer graphics software	`N/A`	not current
MEM22015A	Source and estimate engineering materials requirements	`N/A`	not current
MEM30031A	Operate computer-aided design (CAD) system to produce basic drawing elements	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
SIRXSLS201	Sell products and services	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM50311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.