MSF30822 Certificate III in Flooring Technology

Currenttraining.gov.au: current

Australia's national training register lists MSF30822 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
MSF — Furnishing Training Package
Currency period ends
no end date published
Latest release
Release 1 · 21 December 2022
Supersedes
MSF30818
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after MSF30822: it is the current product, and no replacement is listed.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MSF30818MSF30822not equivalent20 December 2022

    The register records this supersession but attaches no note on what changed.

Is MSF30822 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSF30822 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSF30822 is made of

training.gov.au lists 85 units for MSF30822: 12 core and 73 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 12 listed

CodeUnitIn this product
MSFFL2032Select, prepare and apply moisture barriers to concrete subfloorscurrent
MSFFL2034Prepare subfloors with cementitious coating applicationscurrent
MSFFL3052Plan and cost flooring technology workcurrent
MSFFL3102Receive and prepare flooring materialscurrent
MSFFL3106Establish and maintain safe flooring installation work areascurrent
MSFFL3107Assess flooring installation sitescurrent
MSFGN2001Make measurements and calculationsnot current
MSFGN3005Read and interpret work documentscurrent
MSMSUP102Communicate in the workplacecurrent
MSMSUP106Work in a teamcurrent
MSMWHS200Work safelycurrent
TLID0021Store and handle dangerous goods and hazardous substancescurrent

Elective units 73 listed

CodeUnitIn this product
BSBESB401Research and develop business planscurrent
BSBESB402Establish legal and risk management requirements of new business venturescurrent
BSBOPS304Deliver and monitor a service to customerscurrent
CPCCON3046Repair and rectify concretecurrent
CPCCON3047Cut concretecurrent
CPCCWHS2001Apply WHS requirements, policies and procedures in the construction industrycurrent
CPCCWP3002Apply waterproofing process to internal wet areascurrent
MEM30031Operate computer-aided design (CAD) system to produce basic drawing elementscurrent
MSFFDM4009Match furnishing style and materials to customer requirementscurrent
MSFFL2031Remove existing floor coveringscurrent
MSFFL2033Install hard underlayscurrent
MSFFL2035Mechanically prepare surfaces for installation of flooring materialscurrent
MSFFL2038Install lay flat vinyl floor coveringscurrent
MSFFL2040Install engineered timber flooringcurrent
MSFFL2041Install impact and sound absorption underlaycurrent
MSFFL2042Nail strip timber flooringcurrent
MSFFL2043Install expansion jointscurrent
MSFFL2044Install mouldings and edge trims to timber flooringcurrent
MSFFL2045Coarse sand timber flooringcurrent
MSFFL3055Respond to complaints about flooring installationscurrent
MSFFL3057Select and fit diamond tools for concrete surface preparation and polishingcurrent
MSFFL3058Provide advice to customers on floor coveringscurrent
MSFFL3066Install linoleum floor coveringscurrent
MSFFL3068Install resilient floor coverings using custom designs and decorative finishescurrent
MSFFL3069Install rubber floor coveringscurrent
MSFFL3071Install anti-static and conductive resilient floor coveringscurrent
MSFFL3072Mix and apply thin-film rollcoat resin flooring systemscurrent
MSFFL3073Mix and apply thin-film broadcast resin flooring systemscurrent
MSFFL3074Mix and apply self-levelling resin flooring systemscurrent
MSFFL3075Mix and apply trowel-applied resin flooring systemscurrent
Show the remaining 43 elective units
CodeUnitIn this product
MSFFL3076Mix and apply high-build decorative resin flooring systemscurrent
MSFFL3077Prepare subfloors for resin flooring systemscurrent
MSFFL3078Install direct stick timber flooringcurrent
MSFFL3079Adapt and apply custom designs to timber flooringcurrent
MSFFL3080Install timber flooring materials to stairscurrent
MSFFL3081Install block parquetry flooringcurrent
MSFFL3082Install cork tilescurrent
MSFFL3087Plan and implement maintenance systems for timber, laminate and engineered flooringcurrent
MSFFL3089Apply solvent-based coatings to timber flooringcurrent
MSFFL3090Apply water-based coatings to timber flooringcurrent
MSFFL3092Apply composite-based coatings to timber flooringcurrent
MSFFL3094Apply stains and fillers to timber flooringcurrent
MSFFL3098Sand and fill parquetry flooringcurrent
MSFFL3099Apply finishes to cork flooringcurrent
MSFFL3100Apply densifiers and sealers to concrete surfacescurrent
MSFFL3101Install bamboo flooringcurrent
MSFFL3103Install soft carpet underlay and gripperscurrent
MSFFL3104Install unpatterned tufted carpetcurrent
MSFFL3105Install laminate and hybrid vinyl flooringcurrent
MSFFL3108Polish concrete floorscurrent
MSFFL3109Install carpet tilescurrent
MSFFL3110Install adhesive-fixed carpetcurrent
MSFFL3111Install commercial carpetcurrent
MSFFL3112Install patterned carpetcurrent
MSFFL3113Install carpet on complex stairscurrent
MSFFL3114Install resilient tiles and plankscurrent
MSFFL3115Install commercial sheet vinyl flooringcurrent
MSFFL3116Install resilient sheet to wallscurrent
MSFFL3117Install mosaic and panel parquetry flooringcurrent
MSFFL3118Install sprung timber flooringcurrent
MSFFL3119Install timber battens and plywood in preparation to install strip timbercurrent
MSFFL3120Install timber flooring on joistscurrent
MSFFL3121Apply emulsion wax and oil-based coatings to timber floorscurrent
MSFFL3122Fine sand timber floorscurrent
MSFFL3123Edge sand timber floorscurrent
MSFFL3124Sand cork floorscurrent
MSFFL3125Mix and apply thin-set terrazzocurrent
MSFFL3126Grout polished concrete floorscurrent
MSFFL3127Install synthetic textile floor coverings in indoor and outdoor facilitiescurrent
MSFGN3007Set up and operate a self-employed contracting businesscurrent
MSS402055Apply quality standardscurrent
TAEDEL311Provide work skill instructioncurrent
TAEDEL414Mentor in the workplacecurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSF training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MSF30822 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.