MSF30926 Certificate III in Shading and Security Screens

Currenttraining.gov.au: current

Australia's national training register lists MSF30926 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
MSF — Furnishing Training Package
Currency period ends
no end date published
Latest release
Release 1 · 13 March 2026
Supersedes
MSF30919
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after MSF30926: it is the current product, and no replacement is listed.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MSF30919MSF30926not equivalent12 March 2026

    Qualification code and title updated Qualification description updated Packaging rules revised Core units revised Specialisation streams revised Elective units revised

Is MSF30926 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSF30926 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSF30926 is made of

training.gov.au lists 85 units for MSF30926: 9 core and 76 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 9 listed

CodeUnitIn this product
MSFBAA201Use shading and security sector hand and power toolscurrent
MSFGN2002Move and store materials and productscurrent
MSFGN3004Resolve quality and compliance issuescurrent
MSFGN3005Read and interpret work documentscurrent
MSFOPS201Make measurements and calculationscurrent
MSFOPS301Develop product knowledgecurrent
MSMENV272Participate in environmentally sustainable work practicescurrent
MSMSUP102Communicate in the workplacecurrent
MSMSUP106Work in a teamcurrent

Elective units 76 listed

CodeUnitIn this product
AHCLSC321Install metal structures and featurescurrent
BSBESB402Establish legal and risk management requirements of new business venturescurrent
BSBOPS301Maintain business resourcescurrent
BSBOPS304Deliver and monitor a service to customerscurrent
BSBSTR301Contribute to continuous improvementcurrent
BSBTEC301Design and produce business documentscurrent
CPCCBC4003Select, prepare and administer a construction contractcurrent
CPCCBC4005Produce labour and material schedules for orderingcurrent
CPCCBC4012Read and interpret plans and specificationscurrent
CPCCBC4026Arrange building applications and approvalscurrent
CPCCCM2008Erect and dismantle restricted height scaffoldingcurrent
CPCCCM2012Work safely at heightscurrent
CPCCCM3001Operate elevated work platforms up to 11 metrescurrent
CPCCCO2013Carry out concreting to simple formscurrent
CPCCWHS2001Apply WHS requirements, policies and procedures in the construction industrycurrent
CPCWHS1001Prepare to work safely in the construction industrycurrent
CPPSEC2022Install electronic locks and locking systemscurrent
MSFBA2014Construct metal louvre and canopy-hooded style awningscurrent
MSFBAA202Operate shading and security sector static machinescurrent
MSFBAA203Make up tracks for curtainscurrent
MSFBAA301Assemble awningscurrent
MSFBAA302Assemble interior blindscurrent
MSFBAA303Assemble pelmetscurrent
MSFBAA304Install awningscurrent
MSFBAA305Install interior blindscurrent
MSFBAA306Assess suitability of exterior shading productscurrent
MSFBAA307Assemble roller shutterscurrent
MSFBAA308Install roller shutterscurrent
MSFBAA309Assemble louvre shutterscurrent
MSFBAA310Select and apply hardware and fixings for shading or security screen installationcurrent
Show the remaining 46 elective units
CodeUnitIn this product
MSFBAA311Install automation and intelligent management systemscurrent
MSFBAA312Assemble roller blindscurrent
MSFBAA313Assemble vertical blindscurrent
MSFBAA314Assemble pleated and cellular blindscurrent
MSFBAA315Assemble interior venetian blindscurrent
MSFBAA316Construct unlined curtainscurrent
MSFBAA317Construct lined curtainscurrent
MSFBAA318Install curtainscurrent
MSFBAA319Install interior louvre shutterscurrent
MSFBAA320Install exterior louvre shutterscurrent
MSFGG3034Install residential windows and doorscurrent
MSFGN3003Advise customers on products and servicescurrent
MSFGN3006Estimate and cost jobcurrent
MSFGN4001Research and meet ethical and compliance requirementscurrent
MSFOPS302Perform repairs and maintenancecurrent
MSFSF2016Operate a steam presscurrent
MSFSF2021Fit and adjust curtain hardwarecurrent
MSFSF2022Cut single layer fabricscurrent
MSFSF3015Construct Roman-style blindscurrent
MSFSF3017Measure up and calculate fabric quantities for window coveringscurrent
MSFSS2004Rectify faults in productcurrent
MSFSSG301Install non-security and security screenscurrent
MSFSSG302Assemble non-security and security screenscurrent
MSFSSG303Assess suitability of security screenscurrent
MSFWHS301Identify installation work hazards and select risk control strategiescurrent
MSMSUP390Use structured problem-solving toolscurrent
MSMWHS200Work safelycurrent
MSS402042Apply 5S procedurescurrent
MSS402085Contribute to the application of a proactive maintenance strategycurrent
MSS404051Mistake proof a processcurrent
MSTGN2024Perform minor maintenancecurrent
MSTGN3016Plan tasks to assist production operationscurrent
MSTTF2018Select and handle materials for manufactured textile productscurrent
MSTTF2019Cut and form metalcurrent
MSTTF2022Weld plastic materialscurrent
MSTTF3008Establish client and site requirements for manufactured textile productscurrent
MSTTF3009Create drawings for manufactured textile productscurrent
MSTTF3013Construct manufactured textile productscurrent
MSTTF3014Install manufactured textile productscurrent
MSTTX2014Perform industrial sewing on textile productscurrent
MSTTX3014Set up, adjust and maintain industrial sewing machinescurrent
SIRXSLS001Sell to the retail customercurrent
TLIA0019Despatch stockcurrent
TLIA0020Package goodscurrent
TLIA0023Receive goodscurrent
TLIX0004XAdminister inventory systemscurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSF training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MSF30926 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.