Where the register points next
training.gov.au points at nothing after MSM30325: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MSM30325 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MSM30325 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MSM30325 is made of
training.gov.au lists 64 units for MSM30325: 5 core and 59 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
Elective units 59 listed
| Code | Unit | In this product |
|---|---|---|
| AUMABA012 | Operate load shifting equipment | ●current |
| CPCCCM2007 | Use explosive power tools | ●current |
| CPCCCM2012 | Work safely at heights | ●current |
| CPCCLDG3001 | Licence to perform dogging | ●current |
| CPCCLRG3001 | Licence to perform rigging basic level | ●current |
| CPCCLRG3002 | Licence to perform rigging intermediate level | ●current |
| CPCCOM1016 | Identify requirements for safe precast and tilt-up work | ●current |
| CPCCON2021 | Handle concreting materials and components | ●current |
| CPCCSF2003 | Cut and bend materials using oxy-LPG equipment | ●current |
| CPCCSF2004 | Place and fix reinforcement materials | ●current |
| CPCCSF2006 | Machine-cut reinforcement materials | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| CPCPRE3000 | Lift and place prefabricated concrete elements | ●current |
| CPCPRE3001 | Patch prefabricated components of concrete elements | ●current |
| CPCSIL3001 | Work with products and materials containing crystalline silica | ●current |
| MEM09002 | Interpret technical drawing | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MSAPMSUP201A | Receive or despatch goods | ●current |
| MSMOPS101 | Make measurements | ●current |
| MSMOPS200 | Operate equipment | ●current |
| MSMOPS212 | Use organisation computers or data systems | ●current |
| MSMPMC200 | Organise self | ●current |
| MSMPMC301 | Store materials for production | ●current |
| MSMPMC302 | Operate equipment to blend/mix materials | ●current |
| MSMPMC303 | Operate grinding equipment | ●current |
| MSMPMC304 | Prepare for production | ●current |
| MSMPMC307 | Operate a calcining kiln | ●current |
Show the remaining 29 elective units
| Code | Unit | In this product |
|---|---|---|
| MSMPMC321 | Batch mix concrete | ●current |
| MSMPMC322 | Deliver concrete to site | ●current |
| MSMPMC323 | Prepare asphalt | ●current |
| MSMPMC324 | Move materials | ●current |
| MSMPMC325 | Operate bulk materials handling equipment | ●current |
| MSMPMC326 | Deliver customer service | ●current |
| MSMPMC329 | Prepare moulds and dies | ●current |
| MSMPMC333 | Meet compliance and quality requirements in precast concrete manufacture | ●current |
| MSMPMC334 | Assemble, use and maintain moulds in precast concrete manufacture | ●current |
| MSMPMC335 | Fabricate, assemble and place reinforcement in precast concrete products | ●current |
| MSMPMC336 | Cast, finish and cure precast concrete products | ●current |
| MSMPMC337 | Prestress concrete in precast elements | ●current |
| MSMPMC400 | Carry out stock control | ●current |
| MSMPMC401 | Set up and tune a process | ●current |
| MSMPMC402 | Process raw meal into product | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP200 | Achieve work outcomes | ●current |
| MSMSUP210 | Process and record information | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP280 | Manage conflict at work | ●current |
| MSMSUP330 | Develop and adjust a production schedule | ●current |
| MSMWHS300 | Facilitate the implementation of WHS for a work group | ●current |
| MSS402042 | Apply 5S procedures | ●current |
| MSS402055 | Apply quality standards | ●current |
| PMAOPS101 | Read dials and indicators | ●current |
| RIIMPO304E | Conduct wheel loader operations | ●current |
| TLID0016 | Operate a forklift | ●current |
| TLILIC0023 | Licence to operate a slewing mobile crane (up to 60 tonnes) | ●current |
| TLILIC0040 | Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MSM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MSM30325 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.