MST30619 Certificate III in Laundry Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for MST30619 ended on 20 December 2022 — 3 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 22 December 2023. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
MST — Textiles, Clothing and Footwear
Currency period ends
20 December 2022
Latest release
Release 2 · 13 April 2021 · 2 releases in all
Supersedes
MST30616
Superseded by
MST30622 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MST30619Superseded — equivalentCertificate III in Laundry Operations
  2. equivalent
  3. MST30622CurrentCertificate III in Laundry Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MST30616MST30619equivalent30 January 2020

    Supersedes and is equivalent to MST30616 Certificate III in Laundry Operations

  • MST30619MST30622equivalent21 December 2022

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for MST30619 and for its training package MST (release 5.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is MST30619 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MST30619 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MST30619 is made of

training.gov.au lists 43 units for MST30619: 9 core and 34 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 9 listed

CodeUnitIn this product
BSBCMM201Communicate in the workplacenot current
BSBWHS301Maintain workplace safetynot current
MSMENV272Participate in environmentally sustainable work practicescurrent
MSS402051Apply quality standardsnot current
MSTGN2013Identify fibres, fabrics and textiles used in the TCF industrynot current
MSTGN3014Organise and plan own work to achieve planned outcomescurrent
MSTGN3016Plan tasks to assist production operationscurrent
MSTLA2011Apply infection control policies and procedures in laundry operationscurrent
MSTLA2012Operate washing machinescurrent

Elective units 34 listed

CodeUnitIn this product
FBPOPR2073Work in a socially diverse environmentnot current
FSKNUM021Apply an expanding range of arithmetical calculations for workcurrent
FSKNUM027Collect, organise and interpret statistical data for workcurrent
MEM07033Operate and monitor basic boilercurrent
MEM07034AOperate and monitor intermediate class boilercurrent
MSMSUP382Provide coaching/mentoring in the workplacecurrent
MSTCL3016Press whole garmentscurrent
MSTDC2010Provide customer service in a dry cleaning or laundry enterprisecurrent
MSTDC2012Identify pre-spotting requirementscurrent
MSTDC2014Identify fabric and garment cleaning requirementscurrent
MSTGN2014Operate computing technology in a TCF workplacecurrent
MSTGN2015Use RFID technology to track laundry itemscurrent
MSTGN2017Prepare, finish and package products for storage or dispatchcurrent
MSTGN2020Perform test or inspection to check product qualitycurrent
MSTGN2021Select, transfer and remove materials and productscurrent
MSTGN2022Perform tasks to support productioncurrent
MSTGN3008Receive and sort articles for cleaningcurrent
MSTGN3009Coordinate work of team or sectioncurrent
MSTGN3012Work safely with chemicals in TCF operationscurrent
MSTGN3015Supervise operations in a TCF enterprisecurrent
MSTGN3017Monitor and operate trade waste processcurrent
MSTGN4005Plan and implement production within a work areanot current
MSTGN4010Implement and monitor WHS and environmental systems in the workplacecurrent
MSTGN4014Produce and analyse spreadsheetscurrent
MSTGN4015Coordinate or set-up machines for product changecurrent
MSTGN4016Coordinate the quality system and procedurescurrent
MSTLA2014Inspect, fold and pack theatre linencurrent
MSTLA3003Control washing operationscurrent
MSTLA3004Control linen rewashcurrent
MSTLA3005Control laundry finishing operationscurrent
Show the remaining 4 elective units
CodeUnitIn this product
MSTLA3006Control conditioning and safe drying processescurrent
MSTLA3007Control batch washer operationscurrent
MSTLA3008Determine linen rental requirementscurrent
PMBWASTE302Coordinate waste disposalnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MST training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MST30619 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.