PML30104 Certificate III in Laboratory Skills

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for PML30104 ended on 12 January 2011 — 15 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 14 January 2012 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
PML04 — Laboratory Operations Training Package (Superseded by MSL09)
Currency period ends
12 January 2011
Latest release
Release 1 · 20 October 2004
Supersedes
nothing — no earlier product listed
Superseded by
MSL30109 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. PML30104Superseded — not equivalentCertificate III in Laboratory Skills
  2. not equivalent
  3. MSL30109Superseded — equivalentCertificate III in Laboratory Skills
  4. equivalent
  5. MSL30116Superseded — equivalentCertificate III in Laboratory Skills
  6. equivalent
  7. MSL30118Superseded — equivalentCertificate III in Laboratory Skills
  8. equivalent
  9. MSL30122CurrentCertificate III in Laboratory Skills

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • PML30104MSL30109not equivalent13 January 2011

    The register records this supersession but attaches no note on what changed.

Is PML30104 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PML30104 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PML30104 is made of

training.gov.au lists 43 units for PML30104. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 43 listed

CodeUnitCore or electiveIn this product
PMLCAL400APerform standard calibrationsN/Anot current
PMLCOM300BCommunicate with other peopleN/Anot current
PMLDATA200ARecord and present dataN/Anot current
PMLDATA400AProcess and interpret dataN/Anot current
PMLMAIN300BMaintain the laboratory fit for purposeN/Anot current
PMLMAIN400AMaintain and control stocksN/Anot current
PMLOHS301BWork safely with instruments that emit ionising radiationN/Anot current
PMLOHS302AParticipate in laboratory/field workplace safetyN/Anot current
PMLOHS400AMaintain laboratory/field workplace safetyN/Anot current
PMLORG200AWork within a laboratory/field workplace (induction)N/Anot current
PMLORG301APlan and conduct laboratory/field workN/Anot current
PMLORG400APrepare practical science classes and demonstrationsN/Anot current
PMLQUAL300BContribute to the achievement of quality objectivesN/Anot current
PMLQUAL301BApply critical control point requirementsN/Anot current
PMLQUAL400BContribute to the ongoing development of HACCP plansN/Anot current
PMLQUAL401BApply quality system and continuous improvement processesN/Anot current
PMLSAMP200ACollect routine site samplesN/Anot current
PMLSAMP201AHandle and transport samples or equipmentN/Anot current
PMLSAMP302AReceive and prepare samples for testingN/Anot current
PMLSAMP400BObtain representative samples in accordance with sampling planN/Anot current
PMLSAMP401APrepare mineral samples for analysisN/Anot current
PMLSCIG300BOperate basic handblowing equipmentN/Anot current
PMLSCIG301BRepair glass apparatus using simple glassblowing equipmentN/Anot current
PMLTEST200AConduct routine site measurementsN/Anot current
PMLTEST300BPerform basic testsN/Anot current
PMLTEST303BPrepare working solutionsN/Anot current
PMLTEST304BPrepare culture mediaN/Anot current
PMLTEST305BPerform aseptic techniquesN/Anot current
PMLTEST306BAssist with fieldworkN/Anot current
PMLTEST307BPrepare trial batches for evaluationN/Anot current
Show the remaining 13 units
CodeUnitCore or electiveIn this product
PMLTEST308APerform microscopic examinationN/Anot current
PMLTEST310APerform histological proceduresN/Anot current
PMLTEST402BPrepare, standardise and use solutionsN/Anot current
PMLTEST403BAssist with geotechnical site investigationsN/Anot current
PMLTEST404APerform chemical tests and proceduresN/Anot current
PMLTEST405APerform food testsN/Anot current
PMLTEST406APerform physical testsN/Anot current
PMLTEST407APerform biological proceduresN/Anot current
PMLTEST408AUndertake environmental field-based monitoringN/Anot current
PMLTEST409ACapture and manage scientific imagesN/Anot current
PMLTEST410AUndertake environmental field-based, remote-sensing monitoringN/Anot current
PMLTEST411APerform mechanical testsN/Anot current
PMLTEST412APrepare tissue and cell culturesN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PML training product on the register · Search all training products

Is PML30104 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.