PPM20116 Certificate II in Pulping Operations

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for PPM20116 ended on 8 February 2022 — 4 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 10 February 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
PPM — Pulp & Paper Manufacturing Industry Training Package
Currency period ends
8 February 2022
Latest release
Release 2 · 24 October 2018 · 2 releases in all
Supersedes
FPP20110
Superseded by
PPM20121 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. PPM20116Superseded — not equivalentCertificate II in Pulping Operations
  2. not equivalent
  3. PPM20121CurrentCertificate II in Pulp and Paper Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FPP20110PPM20116equivalent5 May 2016

    Updated to meet Standards for Training Packages

  • PPM20116PPM20121not equivalent9 February 2022

    Two qualifications consolidated into one. Packaging rules, core and elective units revised while total number of units remains the same

Is PPM20116 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PPM20116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PPM20116 is made of

training.gov.au lists 81 units for PPM20116: 3 core and 78 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 3 listed

CodeUnitIn this product
PPMQAS210Apply basic quality practicesnot current
PPMSUS210Apply sustainable work practices/policiesnot current
PPMWHS210Participate in WHS processesnot current

Elective units 78 listed

CodeUnitIn this product
BSBCMM101Apply basic communication skillsnot current
BSBCMM201Communicate in the workplacenot current
CPPSEC2011BControl access to and exit from premisesnot current
CPPSEC2015APatrol premisesnot current
FWPCOT3263Maintain and contribute to energy efficiencynot current
HLTAID003Provide first aidnot current
MEM11016BOrder materialsnot current
MSAPMOHS220AProvide initial First Aid responsecurrent
MSL904002Perform standard calibrationsnot current
MSL973013Perform basic testsnot current
MSMBLIC001Licence to operate a standard boilercurrent
MSMBLIC002Licence to operate an advanced boilercurrent
MSMOPS212Use organisation computers or data systemscurrent
MSMWHS110Follow emergency response procedurescurrent
MSS402020Apply quick changeover proceduresnot current
MSS402030Apply cost factors to work practicesnot current
MSS402040Apply 5S proceduresnot current
MSS402050Monitor process capabilitynot current
MSS402081Contribute to the application of a proactive maintenance strategynot current
PMAWHS211Prepare equipment for emergency responsecurrent
PPMCPR210Prepare chemical productsnot current
PPMCSK310Operate process control equipmentnot current
PPMENV210Identify and monitor environmental discharges/emissionsnot current
PPMEPG210Monitor and control power generation systemnot current
PPMEPG320Manage a power generation system startupnot current
PPMEPG330Coordinate power generation system shutdownnot current
PPMHWP250Store and dispatch waste papernot current
PPMHWP260Receive waste papernot current
PPMHWP270Unload waste papernot current
PPMMHV210Operate overhead cranenot current
Show the remaining 48 elective units
CodeUnitIn this product
PPMNUM210Estimate and calculate basic datanot current
PPMPLN210Plan and undertake a routine tasknot current
PPMPRM210Undertake operator level preventative maintenancenot current
PPMPRM220Perform lubricationnot current
PPMPRS210Identify and rectify problems in the workplacenot current
PPMPRV210Operate ancillary equipmentnot current
PPMPUL210Monitor and control pulping operationsnot current
PPMPUL250Store and distribute pulped productnot current
PPMPUL320Prepare and start up pulping system operationsnot current
PPMPUL330Coordinate and implement pulping plant shutdownsnot current
PPMREC210Monitor and control chemical recovery operationsnot current
PPMREC320Prepare and start up chemical recovery operationsnot current
PPMREC330Coordinate and implement chemical recovery shutdownsnot current
PPMREL210Contribute to effective working relationshipsnot current
PPMRES210Prepare and operate the woodchip production systemnot current
PPMRES250Distribute woodchipsnot current
PPMRES260Receive materialsnot current
PPMRES270Unload materialsnot current
PPMRES340Troubleshoot and rectify primary resource operationsnot current
PPMSPR210Monitor and control stock preparation systemsnot current
PPMSPR320Prepare and start up stock preparation system for productionnot current
PPMSPR330Coordinate and implement stock preparation system shutdownnot current
PPMSTM210Monitor and control boiler operationnot current
PPMSTM320Manage steam boiler start upnot current
PPMSTM330Shut down and bank steam boilernot current
PPMWAS210Operate water systemsnot current
PPMWAS340Troubleshoot and rectify water systemsnot current
PPMWHS310Contribute to WHS processesnot current
PPMWPO210Monitor and control waste paper operationsnot current
PPMWPO320Prepare and start up waste paper operationsnot current
PPMWPO330Coordinate and implement waste paper shutdownnot current
TAEASS301Contribute to assessmentnot current
TAEDEL301Provide work skill instructionnot current
TLIA2012Pick and process ordersnot current
TLIA2022Participate in stocktakesnot current
TLIA3016Use inventory systems to organise stock controlnot current
TLID1001Shift materials safely using manual handling methodsnot current
TLID1002Shift a load using manually-operated equipmentnot current
TLID2003Handle dangerous goods/hazardous substancesnot current
TLID2004Load and unload goods/cargonot current
TLID2010Operate a forkliftnot current
TLID2013Move materials mechanically using automated equipmentnot current
TLID2047Prepare cargo for transfer with slingscurrent
TLID3011Conduct specialised forklift operationscurrent
TLID3024Use specialised liquid bulk transfer equipment (gravity/pressurised)current
TLID3031Rig loadcurrent
TLID3035Operate a boom type elevating work platformcurrent
TLIU4001Implement and monitor environmental protection policies and procedurescurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PPM training product on the register · Search all training products

Is PPM20116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.