RII30613 Certificate III in Small Mining Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for RII30613 ended on 12 December 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 14 December 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
RII — Resources and Infrastructure Industry Training Package
Currency period ends
12 December 2015
Latest release
Release 3 · 7 December 2014 · 3 releases in all
Supersedes
RII30611
Superseded by
RII30615 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. RII30613Superseded — equivalentCertificate III in Small Mining Operations
  2. equivalent
  3. RII30615Deleted from the registerCertificate III in Small Mining Operations

The register does not list a current endpoint for this chain: RII30615 is the last product it points at, and RII30615 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • RII30611RII30613not equivalent13 November 2013

    The register records this supersession but attaches no note on what changed.

  • RII30613RII30615equivalent13 December 2015

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for RII30613 and for its training package RII (release 11.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is RII30613 on your scope?

This page is the register's record of one product. What it cannot tell you is whether RII30613 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What RII30613 is made of

training.gov.au lists 43 units for RII30613: 3 core and 40 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 3 listed

CodeUnitIn this product
RIICOM201DCommunicate in the workplacenot current
RIIRIS201DConduct local risk controlnot current
RIIWHS201DWork safely and follow WHS policies and proceduresnot current

Elective units 40 listed

CodeUnitIn this product
AHCNAR201ACarry out natural area restoration worksnot current
AHCNAR303AImplement revegetation worksnot current
AHCSAW201AConduct erosion and sediment control activitiesnot current
AHCSAW301AConstruct conservation earthworksnot current
CPCCLDG3001ALicence to perform doggingnot current
CPCCLRG3001ALicence to perform rigging basic levelnot current
HLTAID003Provide first aidnot current
RIICAR302DRehabilitate small mine sitecurrent
RIIENV201DIdentify and assess environmental and heritage concernsnot current
RIIERR302DRespond to local emergencies and incidentsnot current
RIIHAN203DConduct lifting operationsnot current
RIIHAN208DPerform doggingnot current
RIIHAN209DPerform basic riggingnot current
RIIMEX201DSuppress dust in open-cut environmentnot current
RIIMEX203DBreak oversize rockcurrent
RIIMEX302DAssess ground conditionscurrent
RIIMPO301DConduct hydraulic excavator operationsnot current
RIIMPO304DConduct wheel loader operationsnot current
RIIMPO314DOperate small open cut mine equipmentnot current
RIIMPO336DConduct belly dump truck operationsnot current
RIIMPO337DConduct articulated haul truck operationsnot current
RIIMPO338DConduct rigid haul truck operationsnot current
RIIMSM301DEstablish a mining claimnot current
RIIMSM302DPlan small mine operationsnot current
RIIMSM303DInstall underground shaftnot current
RIIMSM304DInspect small mines operationsnot current
RIIMSM305DConduct materials extraction operations undergroundnot current
RIIMSM306DDesign, develop and maintain pillar system and ground controlnot current
RIIMSM307DInstall and maintain ventilation systems and equipmentnot current
RIIPEO201DConduct conveyor operationsnot current
Show the remaining 10 elective units
CodeUnitIn this product
RIIRIS202DRespond to site based spillsnot current
RIIRIS301DApply risk management processesnot current
RIISAM207DApply operational maintenance skillsnot current
RIISAM213DPosition and set up mobile lightingnot current
RIISAM310DInstall and commission plant, machinery and servicesnot current
RIISRM303DMove and position materials to form stockpilesnot current
RIISRM304DMaintain stockpilesnot current
RIIUMM201DInstall ground supportcurrent
RIIUMM203DPrepare and perform manual scaling operationscurrent
RIIWHS204DWork safely at heightsnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every RII training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is RII30613 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.