TLI22013 Certificate II in Shunting

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLI22013 ended on 17 October 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 19 October 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
TLI10 — TRANSPORT AND LOGISTICS TRAINING PACKAGE
Currency period ends
17 October 2015
Latest release
Release 2 · 24 December 2013 · 2 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
TLI22015 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLI22013Superseded — equivalentCertificate II in Shunting
  2. equivalent
  3. TLI22015Superseded — equivalentCertificate II in Shunting
  4. equivalent
  5. TLI23220Superseded — equivalentCertificate II in Shunting
  6. equivalent
  7. TLI23221CurrentCertificate II in Shunting

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLI22013TLI22015equivalent18 October 2015

    The register records this supersession but attaches no note on what changed.

Is TLI22013 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI22013 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI22013 is made of

training.gov.au lists 19 units for TLI22013: 10 core and 9 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 10 listed

CodeUnitIn this product
TLIB2122AApply awareness of fundamentals of rail operations in yards or sidingsnot current
TLIC3017AShunt rolling stocknot current
TLIE1003AParticipate in basic workplace communicationnot current
TLIE2007AUse communication systemsnot current
TLIF2006AApply accident-emergency proceduresnot current
TLIF2010AApply fatigue management strategiesnot current
TLIF2080CSafely access the rail corridornot current
TLIF3087AFollow occupational health, safety and environmental procedures in the rail industrynot current
TLIW2041AClip points and apply rail safety equipmentnot current
TLIW3026BOperate stand alone signalling/points control equipmentnot current

Elective units 9 listed

CodeUnitIn this product
RIIOHS205AControl traffic with stop-slow batnot current
TLIB2131APrepare trainnot current
TLIB3019BTest train braking systemnot current
TLIB3021AConduct train roll-by inspectionnot current
TLIC3045AOperate road/rail vehiclenot current
TLIE2008AProcess workplace documentationnot current
TLIF3085AApply local incident response proceduresnot current
TLIF3091AApply awareness of dangerous goods and hazardous materials requirementsnot current
TLIU2012AParticipate in environmentally sustainable work practicesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Is TLI22013 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.