TLIF2080C Safely access the rail corridor

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLIF2080C ended on 17 October 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 19 October 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
TLI10 — TRANSPORT AND LOGISTICS TRAINING PACKAGE
Currency period ends
17 October 2015
Latest release
Release 1 · 21 April 2013
Supersedes
TLIF2080B
Superseded by
TLIF2080 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLIF2080CSuperseded — equivalentSafely access the rail corridor
  2. equivalent
  3. TLIF2080Superseded — equivalentSafely access the rail corridor
  4. equivalent
  5. TLIF0020CurrentSafely access the rail corridor

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLIF2080BTLIF2080Cequivalent20 April 2013

    The register records this supersession but attaches no note on what changed.

  • TLIF2080CTLIF2080equivalent18 October 2015

    Terminology changed from ‘Access Provider’ to Rail Infrastructure Manager to reflect rail legislative term. Updated to align with the Standards for Training Packages.

Official documents on the register

What training.gov.au lists for TLIF2080C and for its training package TLI10 (release 4.2), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • TLIF2080C_R1.pdfTLIF2080C release 1 · product document · published 21 April 2013
  • TLIF2080C_R1.docxTLIF2080C release 1 · product document · published 26 November 2024

Is TLIF2080C on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLIF2080C sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where TLIF2080C is used

training.gov.au lists TLIF2080C inside 27 training products, none of them current. Every one of them is below, with the register's own core or elective flag for TLIF2080C in that product.

Products no longer current 27 listed

The register still records TLIF2080C inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeTLIF2080C is
TLI21311Certificate II in Rail InfrastructureQualificationelective
TLI21911Certificate II in Track ProtectionQualificationelective
TLI22013Certificate II in ShuntingQualificationcore
TLI22113Certificate II in Rail Track Vehicle DrivingQualificationcore
TLI22213Certificate II in Tram or Light Rail InfrastructureQualificationelective
TLI22313Certificate II in Rail Customer ServiceQualificationelective
TLI32813Certificate III in Rail Yard CoordinationQualificationcore
TLI33013Certificate III in Heritage Locomotive Assistant or Steam Locomotive FiremanQualificationelective
TLI33113Certificate III in Rail Customer ServiceQualificationelective
TLI33213Certificate III in Terminal Train DrivingQualificationelective
Show the remaining 17 products no longer current
CodeTraining productTypeTLIF2080C is
TLI33513Certificate III in StevedoringQualificationelective
TLI42613Certificate IV in Train DrivingQualificationelective
TLISS00001Access and Move a Track Vehicle Within a Defined Worksite Skill SetSkill setelective
TLISS00002Accessing the Rail Corridor Skill SetSkill setelective
TLISS00004Blocking Protection Skill SetSkill setelective
TLISS00005Conduct Track Protection Skill SetSkill setelective
TLISS00006Control Rail Traffic Through Worksite Skill SetSkill setelective
TLISS00015Handsignaller Skill SetSkill setelective
TLISS00030Lookout Working Skill SetSkill setelective
TLISS00038Operate Signalling/Point Control Equipment Skill SetSkill setelective
TLISS00039Plan Track Possessions Protection Skill SetSkill setelective
TLISS00041Rail Infrastructure Induction Skill SetSkill setelective
TLISS00053Track Occupancy Protection Skill SetSkill setelective
TLISS00056Travel Track Vehicle Under Block Working Conditions Skill SetSkill setelective
TLISS00057Travel Track Vehicle Under Occupancy Authority Skill SetSkill setelective
TLISS00077Rail Operations Safeworking Skill SetSkill setcore
TLISS00078Rail Signal Panel Operation Skill SetSkill setcore

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is TLIF2080C still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.