When must new enrolments into TLI22213 stop?

New enrolments are not permitted from 19 October 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in TLI22213?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

TLI22213 Certificate II in Tram or Light Rail Infrastructure

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

TLI22213Superseded — equivalentCertificate II in Tram or Light Rail Infrastructure
equivalent
TLI22215Superseded — equivalentCertificate II in Tram or Light Rail Infrastructure
equivalent
TLI27120Superseded — equivalentCertificate II in Rail Infrastructure
equivalent
TLI27121CurrentCertificate II in Rail Infrastructure

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

TLI22213TLI22215equivalent18 October 2015
The register records this supersession but attaches no note on what changed.

Is TLI22213 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI22213 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI22213 is made of

training.gov.au lists 29 units for TLI22213: 10 core and 0 elective, and 19 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Core units 10 listed

Code	Unit	In this product
MEM12023A	Perform engineering measurements	not current
RIIOHS205A	Control traffic with stop-slow bat	not current
TLIB1028A	Maintain and use hand tools	not current
TLIB2092A	Operate minor mechanical equipment	not current
TLIB2125A	Apply awareness of tram or light rail track fundamentals	not current
TLID1001A	Shift materials safely using manual handling methods	not current
TLIE1003A	Participate in basic workplace communication	not current
TLIF1001A	Follow occupational health and safety procedures	not current
TLIF2010A	Apply fatigue management strategies	not current
TLIU2008A	Apply environmental procedures to rail infrastructure	not current

Units the register marks neither core nor elective 19 listed

Code	Unit	Core or elective	In this product
RIICCM205A	Carry out manual excavation	`N/A`	not current
RIICCM207A	Spread and compact materials manually	`N/A`	not current
RIICCM209A	Carry out concrete work	`N/A`	not current
RIIOHS302A	Implement traffic management plan	`N/A`	not current
TLIB1093A	Clean equipment and restore worksite	`N/A`	not current
TLIB2001A	Check and assess operational capabilities of equipment	`N/A`	not current
TLIC2059A	Propel and operate light on-track equipment	`N/A`	not current
TLIF2080C	Safely access the rail corridor	`N/A`	not current
TLIG1001A	Work effectively with others	`N/A`	not current
TLIG2007A	Work in a socially diverse environment	`N/A`	not current
TLIK2010A	Use infotechnology devices in the workplace	`N/A`	not current
TLIS2027A	Install and maintain surface track drainage	`N/A`	not current
TLIS2030A	Carry out track ballasting	`N/A`	not current
TLIS2031A	Install railway sleepers	`N/A`	not current
TLIS2034A	Install and repair rail fastening systems	`N/A`	not current
TLIS2044A	Carry out rail installation	`N/A`	not current
TLIW2001A	Operate under track protection rules	`N/A`	not current
TLIW3027A	Operate minor track equipment	`N/A`	not current
TLIW3035A	Heat and cut materials using oxy-LPG equipment for the rail industry	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Is TLI22213 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.