Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
TLI31815TLI37120=equivalent28 January 2021
The register records this supersession but attaches no note on what changed.
TLI32515TLI37120=equivalent28 January 2021
The register records this supersession but attaches no note on what changed.
TLI32918TLI37120=equivalent28 January 2021
The register records this supersession but attaches no note on what changed.
TLI37120TLI37121=equivalent21 November 2021
The register records this supersession but attaches no note on what changed.
Is TLI37120 on your scope?
This page is the register's record of one product. What it cannot tell you is whether TLI37120 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What TLI37120 is made of
training.gov.au lists 67 units for TLI37120: 4 core and 63 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 4 listed
Elective units 63 listed
| Code | Unit | In this product |
|---|---|---|
| AHCMOM213 | Operate and maintain chainsaws | ●current |
| AHCPCM205 | Fell small trees | ●current |
| CPCCLDG3001 | Licence to perform dogging | ●current |
| NWPCAD002 | Control vegetation on a site | ●current |
| RIICCM201E | Carry out measurements and calculations | ●current |
| RIICCM203D | Read and interpret plans and job specifications | !not current |
| RIIRIS401E | Apply site risk management system | ●current |
| RIIWHS302E | Implement traffic management plans | ●current |
| TAEDEL301 | Provide work skill instruction | !not current |
| TLIB2091 | Measure and record track geometry | ●current |
| TLIB2092 | Operate minor mechanical equipment | ●current |
| TLIB2097 | Install and maintain guard rails | ●current |
| TLIB3040 | Inspect poles and associated hardware | ●current |
| TLIB3094 | Check and repair track geometry | ●current |
| TLIB3095 | Check and repair points and crossings | ●current |
| TLIB3099 | Examine track infrastructure | ●current |
| TLIB3100 | Visually inspect track infrastructure | ●current |
| TLIB3102 | Adjust rail | ●current |
| TLIB4071 | Install and maintain pole mounted switches and transformers | ●current |
| TLIC2058 | Travel medium or heavy self-propelled on-track equipment | ●current |
| TLIC3003 | Drive medium rigid vehicle | ●current |
| TLIC3045 | Operate road/rail vehicle | ●current |
| TLID0012 | Operate a vehicle-mounted loading crane | ●current |
| TLID2010 | Operate a forklift | !not current |
| TLIE0002 | Process workplace documentation | ●current |
| TLIF0008 | Apply safety critical communications in the rail environment | ●current |
| TLIF0015 | Recognise the impact of human capabilities/limitations on human performance in a rail environment | ●current |
| TLIF2006 | Apply accident-emergency procedures | ●current |
| TLIF3058 | Apply safeworking rules and regulations to rail functions | ●current |
| TLIF3089 | Implement fatigue management policies and procedures for rail infrastructure | ●current |
Show the remaining 33 elective units
| Code | Unit | In this product |
|---|---|---|
| TLIG1001 | Work effectively with others | !not current |
| TLIG2007 | Work in a socially diverse environment | ●current |
| TLIG3002 | Lead a work team or group | !not current |
| TLII1002 | Apply customer service skills | !not current |
| TLIK2010 | Use infotechnology devices in the workplace | ●current |
| TLIS0001 | Construct and assemble points and crossings | ●current |
| TLIS0002 | Install and maintain surface track drainage | ●current |
| TLIS0003 | Install turnouts | ●current |
| TLIS0004 | Measure and mark track for resurfacing | ●current |
| TLIS2012 | Install and service rail lubrication equipment | ●current |
| TLIS2033 | Install and repair temporary track supports | ●current |
| TLIS2034 | Install and repair rail fastening systems | ●current |
| TLIS2035 | Install and repair fences and gates | ●current |
| TLIS3010 | Test rail using ultrasonic equipment | ●current |
| TLIS3011 | Test rail using nondestructive testing equipment | ●current |
| TLIS3025 | Implement ballast unloading | ●current |
| TLIS3026 | Implement track maintenance and construction | ●current |
| TLIS3037 | Install and repair rail earthworks | ●current |
| TLIU4001 | Implement and monitor environmental protection policies and procedures | ●current |
| TLIW0003 | Grind rail on tram/light rail systems | ●current |
| TLIW0004 | Grind rails | ●current |
| TLIW0005 | Grind switches and crossings | ●current |
| TLIW0006 | Heat and cut materials using oxy-LPG equipment for the rail industry | ●current |
| TLIW0008 | Weld rail using flashbutt welding process | ●current |
| TLIW2028 | Identify the principles of ballast cleaning operations | ●current |
| TLIW2029 | Identify the principles of ballast regulator operations | ●current |
| TLIW2030 | Identify the principles of dynamic track stabaliser operations | ●current |
| TLIW2031 | Identify the principles of self-propelled rail grinder operations | ●current |
| TLIW2032 | Identify the principles of tamping machine operations | ●current |
| TLIW2033 | Identify the principles of mechanised track laying operations | ●current |
| TLIW3015 | Weld rail using aluminothermic welding process | ●current |
| TLIW3027 | Operate minor track equipment | ●current |
| TLIW3043 | Weld rail on tram/light rail systems using electric welding process | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every TLI training product on the register · Search all training products
Is TLI37120 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.