TLI40218 Certificate IV in Mobile Crane Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLI40218 ended on 20 November 2021 — 4 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 22 November 2022. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
TLI — Transport and Logistics Training Package
Currency period ends
20 November 2021
Latest release
Release 2 · 12 April 2021 · 2 releases in all
Supersedes
TLI41918
Superseded by
TLI40721 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLI40218Superseded — equivalentCertificate IV in Mobile Crane Operations
  2. equivalent
  3. TLI40721Superseded — not equivalentCertificate IV in Mobile Crane Operations
  4. not equivalent
  5. TLI40722Superseded — equivalentCertificate IV in Mobile Crane Operations
  6. equivalent
  7. TLI40724CurrentCertificate IV in Mobile Crane Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLI41918TLI40218equivalent12 September 2018

    The register records this supersession but attaches no note on what changed.

  • TLI40218TLI40721equivalent21 November 2021

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for TLI40218 and for its training package TLI (release 16.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is TLI40218 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI40218 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI40218 is made of

training.gov.au lists 34 units for TLI40218: 10 core and 24 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 10 listed

CodeUnitIn this product
CPCCCM2010BWork safely at heightsnot current
CPCCCM3003Work safely around electrical sources, services and assetscurrent
CPCCWHS1001Prepare to work safely in the construction industrynot current
TLIB3013Maintain mobile cranesnot current
TLID1001Shift materials safely using manual handling methodsnot current
TLIE0002Process workplace documentationcurrent
TLIF2006Apply accident-emergency procedurescurrent
TLIF3084Follow mobile crane safety procedurescurrent
TLILIC0008Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)not current
TLIU1009Monitor plant and equipment in an environmentally sustainable mannercurrent

Elective units 24 listed

CodeUnitIn this product
CPCCLDG3001Licence to perform doggingcurrent
CPCCLRG3001Licence to perform rigging basic levelcurrent
CPCCLRG3002Licence to perform rigging intermediate levelcurrent
HLTAID011Provide First Aidcurrent
HLTAID014Provide Advanced First Aidcurrent
TLIA1001Secure cargocurrent
TLIB2001Check and assess operational capabilities of equipmentcurrent
TLIB3011Set up and rig crane for liftnot current
TLIB3012Plan job and set up work areasnot current
TLIB3015Undertake site inspectioncurrent
TLIB3016De-rig, pack and store tools and equipmentnot current
TLIC3004Drive heavy rigid vehiclecurrent
TLIC3005Drive heavy combination vehiclecurrent
TLIC3010Pilot or escort oversized and/or overmassed loadscurrent
TLIC4006Drive multi-combination vehiclecurrent
TLID3031Rig loadcurrent
TLID4032Plan and conduct specialised liftnot current
TLIE3009Use pilot and escort communicationcurrent
TLIF1002Conduct housekeeping activitiesnot current
TLIF2010Apply fatigue management strategiescurrent
TLILIC0005Licence to operate a boom-type elevating work platform (boom length 11 metres or more)current
TLILIC0013Licence to operate a slewing mobile crane (up to 60 tonnes)not current
TLILIC0014Licence to operate a slewing mobile crane (up to 100 Tonnes)not current
TLILIC0015Licence to operate a slewing mobile crane (over 100 Tonnes)not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is TLI40218 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.