Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- TLI41916Superseded — equivalentCertificate IV in Mobile Crane Operations
- =equivalent
- TLI41918Superseded — equivalentCertificate IV in Mobile Crane Operations
- =equivalent
- TLI40218Superseded — equivalentCertificate IV in Mobile Crane Operations
- =equivalent
- TLI40721Superseded — not equivalentCertificate IV in Mobile Crane Operations
- ≠not equivalent
- TLI40722Superseded — equivalentCertificate IV in Mobile Crane Operations
The chain does not end here: we draw five steps at most, and training.gov.au points on from TLI40722 to TLI40724, which it flags =equivalent to TLI40722. Follow it from that page.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is TLI41916 on your scope?
This page is the register's record of one product. What it cannot tell you is whether TLI41916 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What TLI41916 is made of
training.gov.au lists 36 units for TLI41916: 10 core and 26 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 10 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCM2010B | Work safely at heights | !not current |
| CPCCCM3003A | Work safely around power sources, services and assets | !not current |
| CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | !not current |
| TLIB3013 | Maintain mobile cranes | !not current |
| TLID1001 | Shift materials safely using manual handling methods | !not current |
| TLIE2008 | Process workplace documentation | !not current |
| TLIF2006 | Apply accident-emergency procedures | ●current |
| TLIF3084 | Follow mobile crane safety procedures | ●current |
| TLILIC3006 | Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | !not current |
| TLIU1009 | Monitor plant and equipment in an environmentally sustainable manner | ●current |
Elective units 26 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCLDG3001A | Licence to perform dogging | !not current |
| CPCCLRG3001A | Licence to perform rigging basic level | !not current |
| CPCCLRG3002A | Licence to perform rigging intermediate level | !not current |
| CPCCOHS1001A | Work safely in the construction industry | !not current |
| HLTAID003 | Provide first aid | !not current |
| HLTAID006 | Provide advanced first aid | !not current |
| TLIA1001 | Secure cargo | ●current |
| TLIB2001 | Check and assess operational capabilities of equipment | ●current |
| TLIB3011 | Set up and rig crane for lift | !not current |
| TLIB3012 | Plan job and set up work areas | !not current |
| TLIB3015 | Undertake site inspection | ●current |
| TLIB3016 | De-rig, pack and store tools and equipment | !not current |
| TLIC3004 | Drive heavy rigid vehicle | ●current |
| TLIC3005 | Drive heavy combination vehicle | ●current |
| TLIC3010 | Pilot or escort oversized and/or overmassed loads | ●current |
| TLIC4006 | Drive multi-combination vehicle | ●current |
| TLID3031 | Rig load | ●current |
| TLID4032 | Plan and conduct specialised lift | !not current |
| TLIE3009 | Use pilot and escort communication | ●current |
| TLIF1002 | Conduct housekeeping activities | !not current |
| TLIF2010 | Apply fatigue management strategies | ●current |
| TLILIC2005 | Licence to operate a boom-type elevating work platform (boom length 11 metres or more) | !not current |
| TLILIC4009 | Licence to operate a slewing mobile crane (up to 60 tonnes) | !not current |
| TLILIC4010 | Licence to operate a slewing mobile crane (up to 100 tonnes) | !not current |
| TLILIC4011 | Licence to operate a slewing mobile crane (over 100 tonnes) | !not current |
| TLIP4010 | Assess lift requirements and provide quotation | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every TLI training product on the register · Search all training products
Is TLI41916 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.