UEE30320 Certificate III in Custom Electronics Installations

Currenttraining.gov.au: current

Australia's national training register lists UEE30320 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
UEE — Electrotechnology Training Package
Currency period ends
no end date published
Latest release
Release 3 · 20 December 2022 · 3 releases in all
Supersedes
UEE30311
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after UEE30320: it is the current product, and no replacement is listed.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE30311UEE30320equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

Is UEE30320 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE30320 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE30320 is made of

training.gov.au lists 57 units for UEE30320: 13 core and 44 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 13 listed

CodeUnitIn this product
UEECD0007Apply work health and safety regulations, codes and practices in the workplacecurrent
UEECD0016Document and apply measures to control WHS risks associated with electrotechnology workcurrent
UEECD0019Fabricate, assemble and dismantle utilities industry componentscurrent
UEECD0020Fix and secure electrotechnology equipmentcurrent
UEECD0025Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuitscurrent
UEECD0042Solve problems in ELV single path circuitscurrent
UEECD0043Solve problems in direct current circuitscurrent
UEECD0051Use drawings, diagrams, schedules, standards, codes and specificationscurrent
UEEEC0004Assemble and set up fixed video/audio components and systems in buildings and premisescurrent
UEEEC0062Set up and test residential video/audio equipmentcurrent
UEEEC0074Troubleshoot resonance circuits in an electronic apparatuscurrent
UEEEC0077Verify functionality and compliance of custom electronic installationscurrent
UEERE0001Apply environmentally and sustainable procedures in the energy sectorcurrent

Elective units 44 listed

CodeUnitIn this product
BSBOPS203Deliver a service to customerscurrent
HLTAID011Provide First Aidcurrent
ICTICT214Operate application software packagescurrent
UEEAS0001Assemble electronic componentscurrent
UEEAS0006Use lead-free soldering techniquescurrent
UEECD0011Comply with scheduled and preventative maintenance program processescurrent
UEECD0021Identify and select components, accessories and materials for energy sector work activitiescurrent
UEECD0028Plan an integrated cabling installation systemcurrent
UEECD0035Provide basic instruction in the use of electrotechnology apparatuscurrent
UEECD0040Solve basic problems electronic and digital equipment and circuitscurrent
UEECO0002Maintain documentationcurrent
UEECO0015Provide quotations for installation or service jobscurrent
UEECO0017Source and purchase material/parts for installation or service jobscurrent
UEECS0003Assemble, set up and test computing devicescurrent
UEECS0022Install and configure a client computer operating system and softwarecurrent
UEECS0028Select, install, configure and test multimedia componentscurrent
UEECS0029Set up and configure basic local area network (LAN)current
UEECS0032Support computer hardware and software for engineering applicationscurrent
UEEDV0005Install and maintain cabling for multiple access to telecommunication servicescurrent
UEEEC0002Assemble and install reception antennae and signal distribution equipmentcurrent
UEEEC0003Assemble and set up basic security systemscurrent
UEEEC0006Carry out repairs of predictable faults in video and audio replay/recording apparatuscurrent
UEEEC0027Enter instructions and test wired and wireless security systemscurrent
UEEEC0029Fault find and repair electronic apparatuscurrent
UEEEC0039Install and test microwave antennae and waveguidescurrent
UEEEC0040Install commercial video/audio system componentscurrent
UEEEC0042Install large security systemscurrent
UEEEC0055Repair basic computer equipment faults by replacement of modules/sub-assembliescurrent
UEEEC0056Repair predictable faults in audio componentscurrent
UEEEC0057Repair predictable faults in general electronic apparatuscurrent
Show the remaining 14 elective units
CodeUnitIn this product
UEEEC0058Repair predictable faults in television receiverscurrent
UEEEC0059Repair routine business equipment faultscurrent
UEEEC0061Set up and adjust commercial radio frequency (RF) transmission and reception systemscurrent
UEEEC0065Solve problems in basic electronic circuitscurrent
UEEEC0068Troubleshoot communication systemscurrent
UEEEC0070Troubleshoot faults in television receiverscurrent
UEEEC0073Troubleshoot professional audio reproduction componentscurrent
UEEIC0002Assemble, enter and verify operating instructions in microprocessor equipped devicescurrent
UETDRIS017Perform high voltage field switching operation to a given schedulecurrent
UETDRIS018Perform low voltage field switching operation to a given schedulecurrent
UETDRIS031Maintain insulating oilcurrent
UETDRIS032Solve problems in network equipmentcurrent
UETDRIS033Solve problems in network protectioncurrent
UETDRSB001Perform substation switching operations to a given schedulecurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE30320 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.