UEE32020 Certificate III in Renewable Energy - ELV

deletedthe status token training.gov.au records

Transition clockClosed to new enrolments

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for UEE32020, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
UEE — Electrotechnology Training Package
Currency period ends
18 December 2022
Latest release
Release 2 · 23 March 2022 · 2 releases in all
Supersedes
UEE32011
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from UEE32020. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE32011UEE32020equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

Is UEE32020 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE32020 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE32020 is made of

training.gov.au lists 47 units for UEE32020: 17 core and 30 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 17 listed

CodeUnitIn this product
UEECD0007Apply work health and safety regulations, codes and practices in the workplacecurrent
UEECD0016Document and apply measures to control WHS risks associated with electrotechnology workcurrent
UEECD0019Fabricate, assemble and dismantle utilities industry componentscurrent
UEECD0020Fix and secure electrotechnology equipmentcurrent
UEECD0025Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuitscurrent
UEECD0043Solve problems in direct current circuitscurrent
UEECD0045Solve problems in multiple path extra-low voltage (ELV) a.c. circuitscurrent
UEECD0051Use drawings, diagrams, schedules, standards, codes and specificationscurrent
UEECO0007Participate in electronics and communications work and competency development activitiescurrent
UEEEL0019Solve problems in direct current (d.c.) machinescurrent
UEEEL0021Solve problems in magnetic and electromagnetic devicescurrent
UEERE0001Apply environmentally and sustainable procedures in the energy sectorcurrent
UEERE0022Solve basic problems in photovoltaic energy apparatus and systemsnot current
UEERE0025Carry out basic repairs to renewable energy (RE) apparatusnot current
UEERE0034Diagnose and rectify faults in renewable energy (RE) control systemsnot current
UEERE0046Solve problems in stand-alone renewable energy (RE) systemsnot current
UEERE0048Verify compliance and functionality of an extra-low voltage renewable energy installationnot current

Elective units 30 listed

CodeUnitIn this product
BSBOPS203Deliver a service to customerscurrent
CPCCWHS1001Prepare to work safely in the construction industrynot current
HLTAID009Provide cardiopulmonary resuscitationcurrent
HLTAID011Provide First Aidcurrent
ICTICT214Operate application software packagescurrent
UEECD0011Comply with scheduled and preventative maintenance program processescurrent
UEECD0035Provide basic instruction in the use of electrotechnology apparatuscurrent
UEECO0002Maintain documentationcurrent
UEECO0015Provide quotations for installation or service jobscurrent
UEECO0017Source and purchase material/parts for installation or service jobscurrent
UEERE0006Conduct periodic maintenance of remote area power supply battery bankscurrent
UEERE0007Conduct periodic maintenance of remote area power supply generator setscurrent
UEERE0008Conduct periodic maintenance of remote area power supply photovoltaic arrayscurrent
UEERE0009Conduct periodic maintenance of remote area power supply wind generatorscurrent
UEERE0017Maintain and repair facilities associated with remote area essential service operationsnot current
UEERE0018Maintain and repair remote area power generation facilitiescurrent
UEERE0019Maintain safety and tidiness of remote area power supply systemsnot current
UEERE0023Work safely with remote area power supply systemsnot current
UEERE0024Attend to breakdowns in remote area power supplies (RAPS)not current
UEERE0026Conduct checks in the demand side use of remote area power supplies (RAPS)not current
UEERE0035Install ELV stand-alone photovoltaic power systemsnot current
UEERE0036Install small wind energy conversion systems rated up to 10 kW for ELV stand-alone applicationsnot current
UEERE0039Install, set up and maintain ELV micro-hydro systems rated up to 6.4 kWnot current
UEERE0041Maintain operation of remote area power generation plantnot current
UEERE0043Plan periodic maintenance schedules of remote area power supplies (RAPS)not current
UEERE0045Solve basic problems in micro-hydro systemsnot current
UEERE0047Solve problems in wind energy conversion systems (WECS) rated up to 10 kWnot current
UEERL0001Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplycurrent
UEERL0002Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.current
UEERL0003Conduct in-service safety testing of electrical cord connected equipment and cord assembliescurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE32020 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.