When must new enrolments into UEE42210 stop?

New enrolments are not permitted from 16 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UEE42210?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEE42210 Certificate IV in Instrumentation and Control

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEE42210Superseded — equivalentCertificate IV in Instrumentation and Control
equivalent
UEE42211Superseded — equivalentCertificate IV in Instrumentation and Control
equivalent
UEE42220CurrentCertificate IV in Instrumentation and Control

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEE40907UEE42210not equivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEE42210UEE42111equivalent15 March 2012
The register records this supersession but attaches no note on what changed.
UEE42210UEE42211equivalent15 March 2012
The register records this supersession but attaches no note on what changed.

Is UEE42210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE42210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE42210 is made of

training.gov.au lists 35 units for UEE42210. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 35 listed

Code	Unit	Core or elective	In this product
UEENEEC001B	Maintain documentation	`N/A`	not current
UEENEEC002B	Source and purchase material/parts for installation or service jobs	`N/A`	not current
UEENEEC003B	Provide quotations for installation or service jobs	`N/A`	not current
UEENEEC010B	Deliver a service to customers	`N/A`	not current
UEENEED001B	Use basic computer applications relevant to a workplace	`N/A`	not current
UEENEED007B	Develop, enter and verify programs for programmable logic controllers using ladder instruction set	`N/A`	not current
UEENEEE001B	Apply OHS practices in the workplace	`N/A`	not current
UEENEEE002B	Dismantle, assemble and fabricate electrotechnology components	`N/A`	not current
UEENEEE003B	Solve problems in extra-low voltage single path circuits	`N/A`	not current
UEENEEE004B	Solve problems in multiple path d.c. circuits	`N/A`	not current
UEENEEE005B	Fix and secure equipment	`N/A`	not current
UEENEEE007B	Use drawings, diagrams, schedules and manuals	`N/A`	not current
UEENEEE009B	Comply with scheduled and preventative maintenance program processes	`N/A`	not current
UEENEEE017B	Implement and monitor OHS policies and procedures	`N/A`	not current
UEENEEE020B	Provide basic instruction in the use of electrotechnology apparatus	`N/A`	not current
UEENEEE024C	Compile and produce an electrotechnology report	`N/A`	not current
UEENEEE035B	Document occupational hazards and risks in instrumentation	`N/A`	not current
UEENEEE038B	Participate in development and follow a personal competency development plan	`N/A`	not current
UEENEEH014B	Troubleshoot frequency dependent circuits	`N/A`	not current
UEENEEH043B	Diagnose and rectify faults in digital subsystems of electronic controls	`N/A`	not current
UEENEEH044B	Diagnose and rectify faults in analogue circuits and components in electronic control systems	`N/A`	not current
UEENEEI001B	Install and set up transducers and sensing devices	`N/A`	not current
UEENEEI002B	Solve problems in pressure measurement systems	`N/A`	not current
UEENEEI003B	Solve problems in density/level measurement systems	`N/A`	not current
UEENEEI004B	Solve problems in flow measurement systems	`N/A`	not current
UEENEEI005B	Solve problems in temperature measurement systems	`N/A`	not current
UEENEEI006B	Solve problems in process controllers, transmitters and converters	`N/A`	not current
UEENEEI007C	Install process instrumentation and control cabling and tubing	`N/A`	not current
UEENEEI008C	Install process control apparatus and associated equipment	`N/A`	not current
UEENEEI010B	Set up and adjust process control loops	`N/A`	not current

Show the remaining 5 units

Code	Unit	Core or elective	In this product
UEENEEI012B	Verify compliance and functionality of process control installations	`N/A`	not current
UEENEEI013B	Select equipment for process control systems	`N/A`	not current
UEENEEK042A	Participate in environmentally sustainable work practices	`N/A`	not current
UEENEEK045A	Implement and monitor, policies procedures for environmentally sustainable electrotech work practice	`N/A`	not current
UEENEEP001B	Disconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE42210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.