Can an RTO still enrol new students in UEENEEP001B?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 16 March 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in UEENEEP001B?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEENEEP001B Disconnect and reconnect fixed wired electrical equipment…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEENEEP001BSuperseded — equivalentDisconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply
equivalent
UEENEEP015ADeleted from the registerDisconnect - reconnect motors connected to low voltage installation wiring

training.gov.au publishes 6 replacements for UEENEEP001B. This rail follows UEENEEP015A; the others: UEENEEP011A, UEENEEP014A, UEENEEP012A, UEENEEP010A, UEENEEP013A. The transition clock above is computed from UEENEEP013A, the replacement with the latest inclusion date — the reading most favourable to the provider.

The register does not list a current endpoint for this chain: UEENEEP015A is the last product it points at, and UEENEEP015A is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEENEEP001AUEENEEP001Bequivalent28 July 2011
Part - Refer Note 1 (below). Also, amendment of EKAS alignments
UEENEEP001BUEENEEP010Aequivalent30 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEP001BUEENEEP011Aequivalent30 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEP001BUEENEEP012Aequivalent30 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEP001BUEENEEP013Aequivalent30 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEP001BUEENEEP014Aequivalent30 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEP001BUEENEEP015Aequivalent30 July 2011
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEENEEP001B and for its training package UEE07 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

UEENEEP001B_R1.pdfUEENEEP001B release 1 · product document · published 11 October 2012
UEENEEP001B_R1.docxUEENEEP001B release 1 · product document · published 26 November 2024

Is UEENEEP001B on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEENEEP001B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where UEENEEP001B is used

training.gov.au lists UEENEEP001B inside 11 training products, none of them current. Every one of them is below, with the register's own core or elective flag for UEENEEP001B in that product.

Products no longer current 11 listed

The register still records UEENEEP001B inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

Code	Training product	Type	UEENEEP001B is
CUE40303	Certificate IV in Live Production, Theatre and Events (Technical Operations)	Qualification	elective
UEE30607	Certificate III in Electrical Machine Repair	Qualification	elective
UEE30707	Certificate III in Switchgear and Control Gear	Qualification	elective
UEE31210	Certificate III in Instrumentation and Control	Qualification	elective
UEE31810	Certificate III in Hazardous areas - Instrumentation	Qualification	elective
UEE42210	Certificate IV in Instrumentation and Control	Qualification	elective
UEE42410	Certificate IV in Hazardous areas - Industrial control	Qualification	elective
UEE50310	Diploma of Electrical and Refrigeration and Air-conditioning	Qualification	elective
UEE51010	Diploma of Instrumentation and Control Engineering	Qualification	elective
UEE61410	Advanced Diploma of Engineering - Explosion protection - Industrial control	Qualification	elective

Show the remaining 1 product no longer current

Code	Training product	Type	UEENEEP001B is
UEE61510	Advanced Diploma of Instrumentation and Control Engineering	Qualification	elective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEENEEP001B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.