UEE31210 Certificate III in Instrumentation and Control

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEE31210 ended on 14 March 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 16 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEE07 — Electrotechnology Training Package
Currency period ends
14 March 2012
Latest release
Release 1 · 29 July 2011
Supersedes
UEE31207
Superseded by
UEE31211 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEE31210Superseded — equivalentCertificate III in Instrumentation and Control
  2. equivalent
  3. UEE31211Superseded — equivalentCertificate III in Instrumentation and Control
  4. equivalent
  5. UEE31220Superseded — equivalentCertificate III in Instrumentation and Control
  6. equivalent
  7. UEE31225CurrentCertificate III in Instrumentation and Control

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE31207UEE31210not equivalent28 July 2011

    The register records this supersession but attaches no note on what changed.

  • UEE31210UEE31211equivalent15 March 2012

    The register records this supersession but attaches no note on what changed.

Is UEE31210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE31210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE31210 is made of

training.gov.au lists 30 units for UEE31210. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 30 listed

CodeUnitCore or electiveIn this product
UEENEEC001BMaintain documentationN/Anot current
UEENEEC002BSource and purchase material/parts for installation or service jobsN/Anot current
UEENEEC003BProvide quotations for installation or service jobsN/Anot current
UEENEEC010BDeliver a service to customersN/Anot current
UEENEEC024BParticipate in instrumentation and control work and competency development activitiesN/Anot current
UEENEED001BUse basic computer applications relevant to a workplaceN/Anot current
UEENEED007BDevelop, enter and verify programs for programmable logic controllers using ladder instruction setN/Anot current
UEENEEE001BApply OHS practices in the workplaceN/Anot current
UEENEEE002BDismantle, assemble and fabricate electrotechnology componentsN/Anot current
UEENEEE003BSolve problems in extra-low voltage single path circuitsN/Anot current
UEENEEE004BSolve problems in multiple path d.c. circuitsN/Anot current
UEENEEE005BFix and secure equipmentN/Anot current
UEENEEE007BUse drawings, diagrams, schedules and manualsN/Anot current
UEENEEE009BComply with scheduled and preventative maintenance program processesN/Anot current
UEENEEE020BProvide basic instruction in the use of electrotechnology apparatusN/Anot current
UEENEEE035BDocument occupational hazards and risks in instrumentationN/Anot current
UEENEEH014BTroubleshoot frequency dependent circuitsN/Anot current
UEENEEI001BInstall and set up transducers and sensing devicesN/Anot current
UEENEEI002BSolve problems in pressure measurement systemsN/Anot current
UEENEEI003BSolve problems in density/level measurement systemsN/Anot current
UEENEEI004BSolve problems in flow measurement systemsN/Anot current
UEENEEI005BSolve problems in temperature measurement systemsN/Anot current
UEENEEI006BSolve problems in process controllers, transmitters and convertersN/Anot current
UEENEEI007CInstall process instrumentation and control cabling and tubingN/Anot current
UEENEEI008CInstall process control apparatus and associated equipmentN/Anot current
UEENEEI010BSet up and adjust process control loopsN/Anot current
UEENEEI012BVerify compliance and functionality of process control installationsN/Anot current
UEENEEI013BSelect equipment for process control systemsN/Anot current
UEENEEK042AParticipate in environmentally sustainable work practicesN/Anot current
UEENEEP001BDisconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supplyN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE31210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.