UEENEEP001A Disconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEENEEP001A ended on 27 July 2011 — 15 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 29 July 2012 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
UEE06 — Electrotechnology Training Package (Superseded by UEE07)
Currency period ends
27 July 2011
Latest release
Release 1 · 8 November 2006
Supersedes
nothing — no earlier product listed
Superseded by
UEENEEP001B equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEENEEP001ASuperseded — equivalentDisconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply
  2. equivalent
  3. UEENEEP001BSuperseded — equivalentDisconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply
  4. equivalent
  5. UEENEEP015ADeleted from the registerDisconnect - reconnect motors connected to low voltage installation wiring

The register does not list a current endpoint for this chain: UEENEEP015A is the last product it points at, and UEENEEP015A is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEENEEP001AUEENEEP001Bequivalent28 July 2011

    Part - Refer Note 1 (below). Also, amendment of EKAS alignments

Is UEENEEP001A on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEENEEP001A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where UEENEEP001A is used

training.gov.au lists UEENEEP001A inside 1 training product, which it no longer lists as current. It is below, with the register's own core or elective flag for UEENEEP001A in that product.

Products no longer current 1 listed

The register still records UEENEEP001A inside this one, but it no longer recommends it as current. It is here because a scope history or an old enrolment can still point at it.

CodeTraining productTypeUEENEEP001A is
CUE40303Certificate IV in Live Production, Theatre and Events (Technical Operations)Qualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEENEEP001A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.