When must new enrolments into CUE40303 stop?

New enrolments are not permitted from 21 November 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CUE40303?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CUE40303 Certificate IV in Live Production, Theatre and Events (Technical…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CUE40303Superseded — not equivalentCertificate IV in Live Production, Theatre and Events (Technical Operations)
not equivalent
CUA40413Superseded — equivalentCertificate IV in Live Production and Technical Services
equivalent
CUA40415Superseded — not equivalentCertificate IV in Live Production and Technical Services
not equivalent
CUA40420Superseded — not equivalentCertificate IV in Live Production and Technical Services
not equivalent
CUA40425CurrentCertificate IV in Live Production and Technical Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CUE40303CUA40413not equivalent20 November 2013
Qualification deleted and replaced by a cross sector qualification that covers technical production.

Is CUE40303 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CUE40303 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CUE40303 is made of

training.gov.au lists 72 units for CUE40303. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 72 listed

Code	Unit	Core or elective	In this product
BSBCON401A	Work effectively in a business continuity context	`N/A`	not current
BSBSUS301A	Implement and monitor environmentally sustainable work practices	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
CPCCCA2002A	Use carpentry tools and equipment	`N/A`	not current
CPCCCM3001A	Operate elevated work platforms	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLRG3002A	Licence to perform rigging intermediate level	`N/A`	not current
CPCCLRG4001A	Licence to perform rigging advanced level	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
CPCCSC2002A	Erect and dismantle basic scaffolding	`N/A`	not current
CUEAUD01C	Repair and maintain vision systems	`N/A`	not current
CUEAUD02C	Prepare, rig, test and modify vision systems	`N/A`	not current
CUEAUD03C	Operate vision systems	`N/A`	not current
CUEAUD04C	Develop vision system installation plans	`N/A`	not current
CUEAUD06B	Apply a general knowledge of vision systems to work activities	`N/A`	not current
CUECIN05C	Maintain projection equipment	`N/A`	not current
CUEFSH01B	Identify and manage safety and health requirements at an outdoor fireworks display	`N/A`	not current
CUEFSH02B	Operate an outdoor fireworks display	`N/A`	not current
CUEIND01D	Source and apply entertainment industry knowledge	`N/A`	not current
CUEOHS01C	Implement workplace health, safety and security procedures	`N/A`	not current
CUESMT06C	Plot technical requirements from scores	`N/A`	not current
CUESMT09B	Plot and rehearse cues	`N/A`	not current
CUESMT11B	Create, update and use production reference documents	`N/A`	not current
CUESOU01C	Repair and maintain audio equipment	`N/A`	not current
CUESOU03C	Operate professional audio equipment	`N/A`	not current
CUESOU04C	Mix live audio	`N/A`	not current
CUESOU07B	Apply a general knowledge of audio to work activities	`N/A`	not current
CUESOU08B	Select and manage microphone and other audio input sources	`N/A`	not current

Show the remaining 42 units

Code	Unit	Core or elective	In this product
CUESOU09B	Manage and compile audio replay material	`N/A`	not current
CUESOU10B	Operate wireless audio equipment	`N/A`	not current
CUESOU11B	Set up and operate stage monitor systems	`N/A`	not current
CUESOU12B	Set up and operate audio system control networks	`N/A`	not current
CUESOU13B	Specify, install and operate audio for an outdoor event	`N/A`	not current
CUESTA01C	Install staging elements	`N/A`	not current
CUESTA02C	Operate staging elements	`N/A`	not current
CUESTA03C	Operate flying systems	`N/A`	not current
CUESTA05C	Apply a general knowledge of staging to work activities	`N/A`	not current
CUESTA06B	Apply a general knowledge of theatrical rigging	`N/A`	not current
CUETEM01C	Coordinate production operations	`N/A`	not current
CUETEM03C	Establish and manage production requirements and resources	`N/A`	not current
CUETEM06B	Organise and monitor bump in/bump out	`N/A`	not current
CUETEM07B	Tour the production	`N/A`	not current
CUFDIG301A	Prepare video assets	`N/A`	not current
CUFDIG303A	Produce and prepare photo images	`N/A`	not current
CUFGMT301A	Repair and maintain production equipment	`N/A`	not current
CUFIND401A	Provide services on a freelance basis	`N/A`	not current
CUFLGT101A	Apply a general knowledge of lighting to work activities	`N/A`	not current
CUFLGT301A	Prepare, install and test lighting equipment	`N/A`	not current
CUFLGT302A	Record and operate standard lighting cues	`N/A`	not current
CUFLGT303A	Install and operate follow spots	`N/A`	not current
CUFLGT304A	Operate floor electrics	`N/A`	not current
CUFLGT401A	Implement lighting designs	`N/A`	not current
CUFLGT402A	Set up, record and operate lighting cues and effects	`N/A`	not current
CUFPOS402A	Manage media assets	`N/A`	not current
CUFSFX301A	Maintain and repair special effects items	`N/A`	not current
CUFSFX402A	Coordinate the logistics of special effects operations	`N/A`	not current
CUFSOU301A	Prepare audio assets	`N/A`	not current
CUSSOU301A	Provide sound reinforcement	`N/A`	not current
CUSSOU303A	Set up and disassemble audio equipment	`N/A`	not current
CUSSOU402A	Develop and implement sound plans	`N/A`	not current
CUVCOR09B	Select and apply drawing techniques and media to represent and communicate the concept	`N/A`	not current
CUVCRS03B	Produce computer-aided drawings	`N/A`	not current
CUVCRS04B	Produce technical drawings	`N/A`	not current
CUVCRS06B	Make scale models	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
TLID1007C	Operate a forklift	`N/A`	not current
UEENEEP001B	Disconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply	`N/A`	not current
UEENEEP002B	Attach cords and plugs to electrical equipment for connection to a single phase 250 Volt supply	`N/A`	not current
UEENEEP003B	Attach cords and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply	`N/A`	not current
UEENEEP007B	Locate and rectify faults in electrical low voltage equipment following prescribed procedures	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CUE training product on the register · Search all training products

Is CUE40303 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.