Where the register points next
training.gov.au points at nothing after UEG30122: it is the current product, and no replacement is listed.
This product is listed on the National Schedule of Training Product Development: under review by Powering Skills Organisation (UEG Full Training Product Review), expected submission to the Assurance Body 1 March 2028. That is a submission date, not a supersession date: assurance, endorsement and publication follow, so a new version can only reach the register after it.
Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 25 August 2026 UTC.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEG30122 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEG30122 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEG30122 is made of
training.gov.au lists 143 units for UEG30122: 6 core and 137 elective. To complete it, the register publishes a rule of 6 core units plus 12 electives — 18 units in all.
Core units 6 listed
| Code | Unit | In this product |
|---|---|---|
| BSBLDR301 | Support effective workplace relationships | ●current |
| BSBPEF301 | Organise personal work priorities | ●current |
| UEGNSG002 | Apply environmental policies and procedures in the gas supply industry | ●current |
| UEGNSG031 | Prepare to work in the gas industry | ●current |
| UEGNSG033 | Carry out basic work activities in a gas industry work environment | ●current |
| UEGNSG041 | Apply safe working practices in the gas supply industry | ●current |
Elective units 137 listed
| Code | Unit | In this product |
|---|---|---|
| AVIW0006 | Perform infrastructure inspections using remote operated systems | ●current |
| BSBWHS308 | Participate in WHS hazard identification, risk assessment and risk control processes | ●current |
| CPCCLDG3001 | Licence to perform dogging | ●current |
| CPCCLRG3001 | Licence to perform rigging basic level | ●current |
| CPCCLRG3002 | Licence to perform rigging intermediate level | ●current |
| CPCWHS1001 | Prepare to work safely in the construction industry | ●current |
| HLTAID009 | Provide cardiopulmonary resuscitation | ●current |
| HLTAID011 | Provide First Aid | ●current |
| HLTAID013 | Provide First Aid in remote or isolated site | ●current |
| HLTWHS005 | Conduct manual tasks safely | ●current |
| ICTICT214 | Operate application software packages | ●current |
| MSMPMC400 | Carry out stock control | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP303 | Identify equipment faults | ●current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSMWHS212 | Undertake first response to fire incidents | ●current |
| MSMWHS216 | Operate breathing apparatus | ●current |
| MSMWHS217 | Gas test atmospheres | ●current |
| MSS402061 | Use SCADA systems in operations | !not current |
| MSS402080 | Undertake root cause analysis | !not current |
| PMAOPS223 | Operate and monitor valve systems | ●current |
| PMAOPS315 | Operate and troubleshoot process control systems | ●current |
| PMAOPS317 | Undertake ship transfer operations | ●current |
| PMAOPS338 | Communicate and monitor pipeline activities | ●current |
| PMAOPS346 | Operate and troubleshoot liquefaction process | ●current |
| PMASUP311 | Operate communications hub | ●current |
| PMBWELD301E | Join polyethylene plastic pipelines using butt welding | ●current |
| PMBWELD302E | Join polyethylene plastic pipelines using electrofusion welding | ●current |
| RIICCM205F | Carry out manual excavation | ●current |
| RIICCM206E | Support plant operations | ●current |
Show the remaining 107 elective units
| Code | Unit | In this product |
|---|---|---|
| RIICCM207E | Spread and compact materials manually | ●current |
| RIICCM208E | Carry out basic levelling | ●current |
| RIICCM210E | Install trench support | ●current |
| RIIMPO319E | Conduct backhoe/loader operations | ●current |
| RIIMPO320F | Conduct civil construction excavator operations | ●current |
| RIISAM201E | Handle resources and infrastructure materials and safely dispose of nontoxic materials | ●current |
| RIIWHS202E | Enter and work in confined spaces | ●current |
| RIIWHS204E | Work safely at heights | ●current |
| RIIWHS302E | Implement traffic management plans | ●current |
| TLID0016 | Operate a forklift | ●current |
| TLID3023 | Use specialised liquid bulk gas transfer equipment | ●current |
| TLIF2012 | Apply safe procedures when handling/transporting dangerous goods or explosives | ●current |
| UEGNSG007 | Assess the operational capability of gas safety equipment on a delivery vehicle | ●current |
| UEGNSG010 | Conduct general excavations | ●current |
| UEGNSG011 | Conduct isolations under the permit to work system for gas industry worksites | ●current |
| UEGNSG012 | Construct and lay plastic gas distribution mains | ●current |
| UEGNSG013 | Construct, lay and connect a gas distribution service to a main | ●current |
| UEGNSG014 | Control industrial gas storage/processing operations | ●current |
| UEGNSG015 | Coordinate gas transmission pipeline repairs and modifications | ●current |
| UEGNSG016 | Establish right of way access and maintain transmission pipeline easement | ●current |
| UEGNSG017 | Fill by weight industrial gas cylinders | ●current |
| UEGNSG018 | First on site response to gas pipeline emergencies | ●current |
| UEGNSG019 | Inspect, test and maintain gas cylinders | ●current |
| UEGNSG020 | Load, unload, exchange and connect industrial gas cylinders | ●current |
| UEGNSG021 | Maintain multi-stage, multi-run pressure control devices | ●current |
| UEGNSG022 | Maintain single stage, single run pressure control devices | ●current |
| UEGNSG025 | Monitor and operate complex flow control, measuring and regulating devices | ●current |
| UEGNSG026 | Perform routine maintenance on distribution pipelines and facilities | ●current |
| UEGNSG027 | Perform routine maintenance on transmission pipeline facilities and equipment | ●current |
| UEGNSG028 | Perform scheduled maintenance on gas processing or storage facilities and equipment | ●current |
| UEGNSG030 | Store and handle bulk industrial gases | ●current |
| UEGNSG032 | Carry out aerial surveillance of gas transmission pipelines | ●current |
| UEGNSG034 | Carry out surveillance of gas transmission pipelines | ●current |
| UEGNSG035 | Respond to gas infrastructure emergencies | ●current |
| UEGNSG036 | Supervise and monitor contract work | ●current |
| UEGNSG038 | Supervise the operation of plant and equipment for the construction of gas transmission pipelines | ●current |
| UEGNSG039 | Test new residential and small commercial gas installations | ●current |
| UEGNSG040 | Use a portable detector to locate a combustible gas escape | ●current |
| UEGNSG042 | Pressure test residential and small commercial gas installations | ●current |
| UEGNSG043 | Relight Type A gas appliances | ●current |
| UEGNSG044 | Repair and maintain stationary gas fuelled turbine engines | ●current |
| UEGNSG045 | Carry out surveillance on gas distribution assets | ●current |
| UEGNSG046 | Coat metallic pipelines | ●current |
| UEGNSG048 | Conduct butt fusion of large diameter polyethylene gas pipeline systems | ●current |
| UEGNSG049 | Control excavations in the vicinity of gas transmission pipelines | ●current |
| UEGNSG050 | Control field pipeline operations | ●current |
| UEGNSG052 | Establish a utilities infrastructure worksite | ●current |
| UEGNSG053 | Install and commission stationary gas fuelled turbine engines | ●current |
| UEGNSG054 | Install cathodic protection systems | ●current |
| UEGNSG055 | Launch and recover PIGs in a gas distribution pipeline | ●current |
| UEGNSG056 | Launch and recover PIGs in gas transmission pipelines | ●current |
| UEGNSG057 | Liaise with third party and the community to maintain pipeline integrity and community safety | ●current |
| UEGNSG058 | Locate, prove and protect utility assets | ●current |
| UEGNSG059 | Maintain cathodic protection systems | ●current |
| UEGNSG060 | Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipment | ●current |
| UEGNSG061 | Monitor and control gas odourisation | ●current |
| UEGNSG062 | Monitor and report on cathodic protection systems | ●current |
| UEGNSG063 | Operate and maintain gas station water bath heaters | ●current |
| UEGNSG065 | Install gas flow, measuring and pressure regulating devices | ●current |
| UEGNSG101 | Undertake gas leak surveys | ●current |
| UEGNSG201 | Conduct distribution pipeline emergency repair | ●current |
| UEGNSG202 | Conduct emergency site control on gas distribution assets | ●current |
| UEGNSG203 | Evaluate and extinguish gas fire | ●current |
| UEGNSG205 | Commission or decommission gas distribution pipelines | ●current |
| UEGNSG206 | Construct and lay copper and stainless steel gas distribution pipelines | ●current |
| UEGNSG208 | Construct and lay large copper gas distribution pipelines | ●current |
| UEGNSG211 | Construct and lay steel gas distribution pipelines | ●current |
| UEGNSG214 | Coordinate and conduct gas distribution pipeline repair and modifications | ●current |
| UEGNSG215 | Coordinate construction, laying and testing of gas distribution pipelines | ●current |
| UEGNSG229 | Prepare simple drawings of as laid gas mains and services | ●current |
| UEGNSG302 | Conduct transmission pipeline emergency repair | ●current |
| UEGNSG303 | Carry out transmission pipeline construction work activities | ●current |
| UEGNSG304 | Commission or decommission gas transmission pipelines | ●current |
| UEGNSG306 | Control gas processing, storage or regasification operations in an LNG storage facility | ●current |
| UEGNSG307 | Coordinate the operation of relevant plant and equipment for transmission pipeline construction | ●current |
| UEGNSG309 | Coordinate transmission pipeline construction operations | ●current |
| UEGNSG312 | Inject gas into underground storage | ●current |
| UEGNSG313 | Monitor and operate flow control, pressure measuring and regulating devices for gas transmission | ●current |
| UEGNSG315 | Withdraw gas from underground storage | ●current |
| UEGNSG316 | Work in proximity of transmission pipeline construction plant and equipment | ●current |
| UEGNSG317 | First response to a gas facility event | ●current |
| UEGNSG326 | Coordinate and monitor staff and contractors | ●current |
| UEGNSG501 | Communicate with gas industry stakeholders to meet operational requirements | ●current |
| UEGNSG503 | Monitor and control field activities | ●current |
| UEGNSG504 | Monitor and control gas infrastructure using Control Centre systems | ●current |
| UEGNSG505 | Operate and monitor gas infrastructure to meet nominated demand | ●current |
| UEGNSG509 | Remotely monitor and operate gas transmission flow and pressure measuring and regulating devices | ●current |
| UEGNSG701 | Disconnect and reconnect data logging equipment | ●current |
| UEGNSG702 | Disconnect and reconnect small capacity gas meters | ●current |
| UEGNSG703 | Fault find and repair data logging equipment | ●current |
| UEGNSG704 | Install and commission data logging equipment | ●current |
| UEGNSG707 | Process data logging information | ●current |
| UEGNSG709 | Process meter reading information using appropriate technology | ●current |
| UEGNSG710 | Read and record meter readings | ●current |
| UEGNSG715 | Use data logging equipment | ●current |
| UEGNSG901 | Apply safety practices, procedures, and compliance standards for handling hydrogen gas | ●current |
| UEGNSG902 | Commission, operate and maintain electrolysers | ●current |
| UEGNSG903 | Fault find and repair hydrogen storage equipment | ●current |
| UEGNSG904 | Inject hydrogen gas into distribution networks | ●current |
| UEGNSG905 | Monitor and control hydrogen in gas distribution networks | ●current |
| UEGNSG906 | Undertake routine hydrogen storage operations | ●current |
| UEPMNT367 | Install and commission stationary gas fuelled reciprocating engines | ●current |
| UEPMNT368 | Repair and maintain stationary gas fuelled reciprocating engines | ●current |
| UEPOPS059 | Manage, operate and monitor a gas turbine unit | ●current |
| UEPOPS092 | Operate and monitor fixed fire protection systems | ●current |
| UEPOPS107 | Operate and monitor supervisory control and data acquisition systems | ●current |
| UETDREL006 | Work safely in the vicinity of live electrical apparatus as a non-electrical worker | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEG training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEG30122 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.