UEG60118 Advanced Diploma of Gas Supply Industry Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEG60118 ended on 23 January 2021 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 25 January 2022 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEG — Gas Industry Training Package
Currency period ends
23 January 2021
Latest release
Release 1 · 5 September 2018
Supersedes
UEG60114
Superseded by
UEG60120 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG60118Superseded — equivalentAdvanced Diploma of Gas Supply Industry Operations
  2. equivalent
  3. UEG60120Deleted from the registerAdvanced Diploma of Gas Supply Industry Operations

The register does not list a current endpoint for this chain: UEG60120 is the last product it points at, and UEG60120 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG60114UEG60118equivalent4 September 2018

    The register records this supersession but attaches no note on what changed.

  • UEG60118UEG60120equivalent24 January 2021

    The register records this supersession but attaches no note on what changed.

Is UEG60118 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG60118 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG60118 is made of

training.gov.au lists 152 units for UEG60118: 7 core and 145 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 7 listed

CodeUnitIn this product
UEGNSG005Prepare to work in the gas industrynot current
UEGNSG113Manage a utilities industry WHS management systemnot current
UEGNSG120Manage gas system environmental compliancenot current
UEGNSG123Manage financial resources in a gas industry facilitynot current
UEGNSG132Carry out basic work activities in a gas industry work environmentnot current
UEGNSG133Comply with environmental policies and procedures in the utilities industrynot current
UEGNSG141Apply workplace health and safety regulations, codes and practices in the gas supply industrynot current

Elective units 145 listed

CodeUnitIn this product
BSBCUS501Manage quality customer servicenot current
BSBFLM309Support continuous improvement systems and processesnot current
BSBINM501Manage an information or knowledge management systemnot current
BSBINM601Manage knowledge and informationnot current
BSBINN502Build and sustain an innovative work environmentnot current
BSBINN601Lead and manage organisational changenot current
BSBLED501Develop a workplace learning environmentnot current
BSBMGT502Manage people performancenot current
BSBMGT516Facilitate continuous improvementnot current
BSBMGT517Manage operational plannot current
BSBWHS501Ensure a safe workplacenot current
BSBWHS601Apply legislative frameworks for WHSnot current
BSBWHS602Facilitate WHS activitiesnot current
BSBWHS603Implement WHS risk managementcurrent
BSBWOR501Manage personal work priorities and professional developmentnot current
BSBWOR502Lead and manage team effectivenessnot current
CPCCOHS1001AWork safely in the construction industrynot current
CPCCWHS1001Prepare to work safely in the construction industrynot current
CPPFES2005ADemonstrate first attack firefighting equipmentnot current
HLTAID001Provide cardiopulmonary resuscitationnot current
HLTAID003Provide first aidnot current
HLTCPR201APerform CPRnot current
MEM07001BPerform operational maintenance of machines/equipmentnot current
MSMWHS217Gas test atmospherescurrent
MSS402061Use SCADA systems in operationsnot current
PMAOMIR512Establish incident response preparedness and response systemscurrent
PMAOPS201BOperate fluid flow equipmentnot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
Show the remaining 115 elective units
CodeUnitIn this product
UEENEEG105AVerify compliance and functionality of low voltage general electrical installationsnot current
UEENEEI112AVerify compliance and functionality of instrumentation and control installationsnot current
UEENEEM020AAttend to breakdowns in hazardous areas - gas atmospheresnot current
UEENEEM076AUse and maintain the integrity of a portable gas detection devicenot current
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous areanot current
UEGNSG004Locate, prove and protect utility assetsnot current
UEGNSG006Use a portable gas detector to locate escapenot current
UEGNSG106Coordinate repair of pipeline, facilities and equipmentnot current
UEGNSG108Operate and monitor pipeline control systemsnot current
UEGNSG109Control field pipeline operationsnot current
UEGNSG110Supervise technical operations for gas distribution or transmissionnot current
UEGNSG111Produce maintenance strategies and plans for a gas facilitynot current
UEGNSG114Coordinate and monitor implementation of a risk management plan for a utilities industry facilitynot current
UEGNSG115Manage gas systems projectsnot current
UEGNSG116Manage gas industry physical resourcesnot current
UEGNSG117Plan and implement the data acquisition and metering requirements of a gas systemnot current
UEGNSG118Select and commission equipment to meet pressure and temperature control specificationsnot current
UEGNSG119Manage workplace risk in a gas industry facilitynot current
UEGNSG121Prepare safe design specifications of a gas systemnot current
UEGNSG122Manage a customer service gas business unitnot current
UEGNSG131Compile a gas industry technical reportnot current
UEGNSG134Establish a utilities infrastructure work sitenot current
UEGNSG135Monitor and control gas odourisationnot current
UEGNSG136Carry out transmission pipeline construction work activitiesnot current
UEGNSG137Operate and maintain gas station water bath heatersnot current
UEGNSG138Install and commission stationary gas fuelled turbine enginesnot current
UEGNSG139Repair and maintain stationary gas fuelled turbine enginesnot current
UEGNSG140Apply environmental policies and procedures in the utilities industrynot current
UEGNSG142Conduct isolations under the permit to work system for gas industry work sitesnot current
UEGNSG204Coordinate and conduct gas distribution pipeline repair and modificationsnot current
UEGNSG207Coordinate construction, laying and testing of gas distribution pipelinesnot current
UEGNSG210Supervise and monitor contract staff for work on distribution pipelinesnot current
UEGNSG212Construct, lay and connect a gas distribution service to a plastic mainnot current
UEGNSG213Construct, lay and connect a gas distribution service to a steel mainnot current
UEGNSG216Commission or decommission gas distribution pipelinesnot current
UEGNSG217Launch and recover PIGs in a gas distribution pipelinenot current
UEGNSG218Carry out surveillance on gas distribution assetsnot current
UEGNSG219Conduct excavations in the utilities industrynot current
UEGNSG220Construct and lay polyethylene gas distribution mainsnot current
UEGNSG221First on site response to gas pipeline emergenciesnot current
UEGNSG222Construct and lay nylon or PVC gas distribution mainsnot current
UEGNSG223Construct and lay steel gas distribution pipelinesnot current
UEGNSG224Construct and lay copper and stainless steel gas distribution pipelinesnot current
UEGNSG225Perform routine maintenance on distribution pipeline facilities and equipmentnot current
UEGNSG226Assist with the construction, laying and connection of gas distribution services to mainsnot current
UEGNSG227Assist with the construction and laying of gas distribution mainsnot current
UEGNSG228Construct and lay large copper gas distribution pipelinesnot current
UEGNSG229Prepare simple drawings of as laid gas mains and servicescurrent
UEGNSG305Coordinate gas transmission pipeline repairs and modificationsnot current
UEGNSG308Identify, evaluate and control threats to transmission pipelinesnot current
UEGNSG310Supervise and monitor contract worknot current
UEGNSG311Site control of third party works in the vicinity of a transmission pipelinenot current
UEGNSG314Liaise with third party and the community to maintain pipeline integrity and community safetynot current
UEGNSG319Custody transfer metering and gas quality analysisnot current
UEGNSG324Follow company procedures to deal with incidents related to the abuse of drugs and alcoholnot current
UEGNSG325Coordinate the operation of relevant plant and equipment for transmission pipeline constructionnot current
UEGNSG326Coordinate and monitor staff and contractorscurrent
UEGNSG327Coordinate transmission pipeline construction operationsnot current
UEGNSG330Coat metallic pipelinesnot current
UEGNSG331Establish right of way access for transmission pipeline constructionnot current
UEGNSG332Undertake hydro-testing for transmission pipeline constructionnot current
UEGNSG333Work in proximity of transmission pipeline construction plant and equipmentnot current
UEGNSG342Maintain pipeline easementsnot current
UEGNSG344Commission or decommission gas transmission pipelinesnot current
UEGNSG346Launch and recover PIGs in gas transmission pipelinesnot current
UEGNSG347Perform routine maintenance on transmission pipeline facilities and equipmentnot current
UEGNSG348Supervise the operation of plant and equipment for the construction of gas transmission pipelinesnot current
UEGNSG349Carry out surveillance of gas transmission pipelinesnot current
UEGNSG350First response to a gas facility eventnot current
UEGNSG352Check and report on gas station conditionsnot current
UEGNSG353Carry out aerial surveillance of gas transmission pipelinesnot current
UEGNSG354Control excavations in the vicinity of gas transmission pipelinesnot current
UEGNSG355Monitor and report on cathodic protection systemsnot current
UEGNSG356Monitor and operate flow control, pressure measuring and regulating devices for gas transmissionnot current
UEGNSG411Maintain cathodic protection systemsnot current
UEGNSG412Install cathodic protection systemsnot current
UEGNSG506Respond to gas infrastructure emergenciesnot current
UEGNSG507Remotely monitor and operate gas transmission flow and pressure measuring and regulating devicesnot current
UEGNSG508Remotely check and report on gas station conditionsnot current
UEGNSG511Operate gas infrastructure to meet nominated demandnot current
UEGNSG512Control centre communication with gas industry stakeholdersnot current
UEGNSG513Manage emergencies and critical incidents for gas infrastructurenot current
UEGNSG514Managing and controlling field activitiesnot current
UEGNSG515Use control centre systems to monitor and control gas infrastructurenot current
UEGNSG611Control LPG storage/processing operationsnot current
UEGNSG612Supervise technical operations for liquefied petroleum gas storage and processingnot current
UEGNSG614Load, unload, exchange and connect LPG cylindersnot current
UEGNSG615Fill LPG cylindersnot current
UEGNSG616Refurbish gas cylindersnot current
UEGNSG617Monitor and control the transfer of bulk LPGnot current
UEGNSG618Process liquefied petroleum gas (LPG)not current
UEGNSG619Perform scheduled maintenance on gas processing or storage facilities and equipmentnot current
UEGNSG620Organise the repair of faults in LPG processing or storage facilities and equipmentnot current
UEGNSG621Control bulk storage of LPGnot current
UEGNSG622Assess the operational capability of gas safety equipment on a delivery vehiclenot current
UEGNSG705Disconnect and reconnect small capacity gas metersnot current
UEGNSG706Test new residential and small commercial gas installationsnot current
UEGNSG708Pressure test residential and small commercial gas installationsnot current
UEGNSG711Process meter reading information using appropriate technologynot current
UEGNSG712Read and record meter readingsnot current
UEGNSG713Investigate billing exceptions-conditionsnot current
UEGNSG714Relight Type A gas appliancesnot current
UEGNSG804Maintain single stage and single run gas flow and pressure control and measuring devicesnot current
UEGNSG805Maintain multi-stage and multi-run gas flow and pressure measuring and regulating devicesnot current
UEGNSG806Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipmentnot current
UEGNSG807Install gas flow, measuring and pressure regulating devicesnot current
UEGNSG811Monitor and operate complex flow control, measuring and regulating devices for gas distributionnot current
UEPMNT367AInstall and commission stationary gas fuelled reciprocating enginesnot current
UEPMNT368ARepair and maintain stationary gas fuelled reciprocating enginesnot current
UEPOPS203BOperate and monitor communications systemnot current
UEPOPS205BConduct minor mechanical maintenancenot current
UEPOPS317BOperate and monitor fixed fire protection systemsnot current
UEPOPS336BManage, operate and monitor a gas turbine unitnot current
UEPOPS347BOperate and monitor supervisory, control and data acquisition systemsnot current
UETTDREL14AWorking safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG60118 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.