UET20419 Certificate II in Transmission Structure and Line Assembly

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET20419 ended on 18 September 2021 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 20 September 2022. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET — Transmission, Distribution and Rail Sector
Currency period ends
18 September 2021
Latest release
Release 1 · 25 September 2019
Supersedes
UET20412
Superseded by
UET20421 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET20419Superseded — equivalentCertificate II in Transmission Structure and Line Assembly
  2. equivalent
  3. UET20421Superseded — not equivalentCertificate II in Transmission Structure and Line Assembly
  4. not equivalent
  5. UET20422CurrentCertificate II in Transmission Line Construction

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET20412UET20419equivalent24 September 2019

    The register records this supersession but attaches no note on what changed.

  • UET20419UET20421equivalent19 September 2021

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UET20419 and for its training package UET (release 7.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is UET20419 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET20419 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET20419 is made of

training.gov.au lists 13 units for UET20419: 3 core and 10 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 3 listed

CodeUnitIn this product
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UETTDREL13Comply with sustainability, environmental and incidental response policies and proceduresnot current
UETTDRTP23Erect power systems transmission structuresnot current

Elective units 10 listed

CodeUnitIn this product
AHCMOM304Operate machinery and equipmentcurrent
CPCCWHS1001Prepare to work safely in the construction industrynot current
HLTAID001Provide cardiopulmonary resuscitationnot current
HLTAID003Provide first aidnot current
HLTAID009Provide cardiopulmonary resuscitationcurrent
HLTAID011Provide First Aidcurrent
TLILIC0005Licence to operate a boom-type elevating work platform (boom length 11 metres or more)current
UETTDRTP22Establish and reinstate a power systems transmission structure work sitenot current
UETTDRTP24Erect power systems transmission structure hardwarenot current
UETTDRTP25Pre-tension stringing overhead transmission conductors and cablesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UET20419 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.