UET60222 Advanced Diploma of ESI - Power Systems

Currenttraining.gov.au: current

Australia's national training register lists UET60222 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
UET — Transmission, Distribution and Rail Sector
Currency period ends
no end date published
Latest release
Release 2 · 11 August 2025 · 2 releases in all
Supersedes
UET60221
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after UET60222: it is the current product, and no replacement is listed.

This product is listed on the National Schedule of Training Product Development: under review by Powering Skills Organisation (Review and Update of the UET Training Package), expected submission to the Assurance Body 1 March 2028. That is a submission date, not a supersession date: assurance, endorsement and publication follow, so a new version can only reach the register after it.

Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 25 August 2026 UTC.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET60221UET60222not equivalent13 October 2022

    The register records this supersession but attaches no note on what changed.

Is UET60222 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET60222 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET60222 is made of

training.gov.au lists 79 units for UET60222: 6 core and 73 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
UEECD0007Apply work health and safety regulations, codes and practices in the workplacecurrent
UEECD0044Solve problems in multiple path circuitscurrent
UEECD0046Solve problems in single path circuitscurrent
UEECD0051Use drawings, diagrams, schedules, standards, codes and specificationscurrent
UEEEL0020Solve problems in low voltage a.c. circuitscurrent
UEEEL0021Solve problems in magnetic and electromagnetic devicescurrent

Elective units 73 listed

CodeUnitIn this product
BSBFIN501Manage budgets and financial planscurrent
BSBHRM523Coordinate the learning and development of teams and individualscurrent
BSBINS501Implement information and knowledge management systemscurrent
BSBLDR522Manage people performancecurrent
BSBOPS502Manage business operational planscurrent
BSBOPS505Manage organisational customer servicecurrent
BSBPEF501Manage personal and professional developmentcurrent
BSBSTR501Establish innovative work environmentscurrent
BSBSTR502Facilitate continuous improvementcurrent
BSBSUS511Develop workplace policies and procedures for sustainabilitycurrent
BSBTWK502Manage team effectivenesscurrent
MEM30031Operate computer-aided design (CAD) system to produce basic drawing elementscurrent
MEM30033Use computer-aided design (CAD) to create and display 3D modelscurrent
TLIF0021Administer the implementation of fatigue management strategiescurrent
TLIF2010Apply fatigue management strategiescurrent
UEECD0010Compile and produce an energy sector detailed reportcurrent
UEECD0019Fabricate, assemble and dismantle utilities industry componentscurrent
UEECD0030Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and softwarecurrent
UEECD0031Prepare engineering drawings using manual drafting and CAD for electrotechnology applicationscurrent
UEECD0032Produce detailed electrotechnology/utilities drawings using CAD equipment and softwarecurrent
UEECD0036Provide engineering solutions for problems in complex multiple path circuitscurrent
UEECD0039Provide solutions to basic engineering computational problemscurrent
UEECO0001Estimate electrotechnology projectscurrent
UEECS0033Use engineering applications software on personal computerscurrent
UEEEL0019Solve problems in direct current (d.c.) machinescurrent
UEEEL0062Provide engineering solutions to problems in complex polyphase power circuitscurrent
UEEIC0012Develop structured programs to control external devicescurrent
UEPOPS030Coordinate power generationcurrent
UEPOPS038Evaluate cost estimations and initiate appropriate solutionscurrent
UETDRDS015Assess distributed energy resource connections to a distribution networkcurrent
Show the remaining 43 elective units
CodeUnitIn this product
UETDRDS016Coordinate and perform line and easement surveyscurrent
UETDRDS017Design customer substationscurrent
UETDRDS018Design distribution protection systemscurrent
UETDRDS019Design distribution substationscurrent
UETDRDS020Design overhead distribution systemscurrent
UETDRDS021Design public lighting systemscurrent
UETDRDS022Design underground distribution systemscurrent
UETDRDS023Draft and layout distribution substation minor upgradecurrent
UETDRDS024Draft and layout overhead distribution extensioncurrent
UETDRDS025Draft and layout street lighting systemcurrent
UETDRDS026Draft and layout underground distribution extensioncurrent
UETDRDS027Investigate quality of supply issuescurrent
UETDRDS028Prepare and manage construction plans for electrical infrastructurecurrent
UETDREL005Work safely in the vicinity of live electrical apparatuscurrent
UETDRIS025Diagnose and resolve faults in distribution systemscurrent
UETDRIS026Diagnose and resolve faults in electrical apparatuscurrent
UETDRIS027Diagnose and resolve faults in transmission systemscurrent
UETDRIS028Implement and monitor environmental policies and procedurescurrent
UETDRIS029Implement and monitor organisational WHS/OHS policies, procedures and programscurrent
UETDRIS032Solve problems in network equipmentcurrent
UETDRIS033Solve problems in network protectioncurrent
UETDRSO012Coordinate and manage distribution and sub-transmission network access and activitiescurrent
UETDRSO013Coordinate and manage transmission network access and activitiescurrent
UETDRSO014Coordinate operations in a regulated energy marketcurrent
UETDRSO015Develop and validate distribution and sub-transmission switching programscurrent
UETDRSO016Develop and validate low voltage switching programscurrent
UETDRSO017Develop and validate transmission switching programscurrent
UETDRSO018Dispatch and monitor field staff activitiescurrent
UETDRSO019Manage supply and demand in distribution and sub-transmission networkscurrent
UETDRSO020Operate SCADA equipmentcurrent
UETDRSO021Respond to protection operationscurrent
UETDRTS028Calibrate, verify and certify revenue metering/energy measurement instrumentscurrent
UETDRTS029Commission and maintain communication equipmentcurrent
UETDRTS030Commission and maintain complex energy/revenue metering schemescurrent
UETDRTS031Commission and maintain energy/revenue metering schemescurrent
UETDRTS032Commission and maintain metering schemescurrent
UETDRTS033Commission and maintain network protection and control systemscurrent
UETDRTS034Commission and maintain voltage regulating equipmentcurrent
UETDRTS035Conduct evaluation of network protection and control system faultscurrent
UETDRTS036Develop secondary protection and control scheme isolation and restoration documentscurrent
UETDRTS037Maintain and calibrate protection relays and meterscurrent
UETDRTS038Perform accuracy checks on instrument transformerscurrent
UETDRTS039Perform current injection testing of secondary devicescurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UET60222 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.