WRHHD406B Work as a session stylist

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for WRHHD406B ended on 18 July 2011 — 15 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 20 July 2012. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding the replacement to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Unit of competency
Training package
WRH06 — Hairdressing Training Package
Currency period ends
18 July 2011
Latest release
Release 1 · 18 April 2011
Supersedes
WRHHD406A
Superseded by
SIHHTLS403A not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. WRHHD406BSuperseded — not equivalentWork as a session stylist
  2. not equivalent
  3. SIHHTLS403ASuperseded — equivalentWork as a session stylist
  4. equivalent
  5. SHBHTLS003CurrentWork as a session stylist

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • WRHHD406AWRHHD406Bequivalent19 April 2011

    Employability skills added

  • WRHHD406BSIHHTLS403Anot equivalent19 July 2011

    Updated unit and not equivalent to WRHHD406B - Elements 5 and 6 removed.Previously contained the following prerequisites:• WRHHD303A Design and apply short to medium-length hair design finishes• WRHCL302B Colour and lighten hair• WRHCL303B Design and perform full and partial highlighting techniques• WRHCL304A Perform colour correction• WRHCR302B Perform chemical curling and volumising services• WRHCR303B Perform chemical straightening and relaxing servicesand either• WRHHC306B Combine haircut structures on womenor• WRHHC307B Combine haircut structures for traditional and classic designs on men

Official documents on the register

What training.gov.au lists for WRHHD406B and for its training package WRH06 (release 2.2), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • WRHHD406B_R1.docxWRHHD406B release 1 · product document · published 26 November 2024
  • WRHHD406B_R1.pdfWRHHD406B release 1 · product document · published 20 July 2012

Is WRHHD406B on your scope?

This page is the register's record of one product. What it cannot tell you is whether WRHHD406B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where WRHHD406B is used

training.gov.au lists WRHHD406B inside 1 training product, which it no longer lists as current. It is below, with the register's own core or elective flag for WRHHD406B in that product.

Products no longer current 1 listed

The register still records WRHHD406B inside this one, but it no longer recommends it as current. It is here because a scope history or an old enrolment can still point at it.

CodeTraining productTypeWRHHD406B is
WRH40109Certificate IV in HairdressingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every WRH training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is WRHHD406B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.