BSB51307 Diploma of Occupational Health and Safety

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for BSB51307 ended on 16 December 2012 — 13 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 18 December 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding the replacement to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
BSB07 — Business Services Training Package
Currency period ends
16 December 2012
Latest release
Release 2 · 28 November 2011 · 2 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
BSB51312 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. BSB51307Superseded — not equivalentDiploma of Occupational Health and Safety
  2. not equivalent
  3. BSB51312Superseded — equivalentDiploma of Work Health and Safety
  4. equivalent
  5. BSB51315Superseded — equivalentDiploma of Work Health and Safety
  6. equivalent
  7. BSB51319CurrentDiploma of Work Health and Safety

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • BSB51307BSB51312not equivalent17 December 2012

    Total number of units increased from 8 to 9. BSB51307 used an elective only model, BSB51312 is a core plus elective model - NOT EQUIVALENT.

Official documents on the register

What training.gov.au lists for BSB51307 and for its training package BSB07 (release 9.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • BSB51307_R2.pdfBSB51307 release 2 · product document · published 20 July 2012
  • BSB51307_R2.docxBSB51307 release 2 · product document · published 26 November 2024

Is BSB51307 on your scope?

This page is the register's record of one product. What it cannot tell you is whether BSB51307 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What BSB51307 is made of

training.gov.au lists 11 units for BSB51307. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 11 listed

CodeUnitCore or electiveIn this product
BSBMGT502BManage people performanceN/Anot current
BSBMGT515AManage operational planN/Anot current
BSBOHS501BParticipate in the coordination and maintenance of a systematic approach to managing OHSN/Anot current
BSBOHS502BParticipate in the management of the OHS information and data systemsN/Anot current
BSBOHS503BAssist in the design and development of OHS participative arrangementsN/Anot current
BSBOHS504BApply principles of OHS risk managementN/Anot current
BSBOHS505CManage hazards in the work environmentN/Anot current
BSBOHS506BMonitor and facilitate the management of hazards associated with plantN/Anot current
BSBOHS507BFacilitate the application of principles of occupational health to control OHS riskN/Anot current
BSBOHS508BParticipate in the investigation of incidentsN/Anot current
BSBSUS501ADevelop workplace policy and procedures for sustainabilityN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every BSB training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is BSB51307 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.