Can an RTO still enrol new students in CPP30111?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPP30111?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPP30111 Certificate III in Surveying and Spatial Information Services

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPP30111Superseded — not equivalentCertificate III in Surveying and Spatial Information Services
not equivalent
CPP30112Superseded — equivalentCertificate III in Surveying and Spatial Information Services
equivalent
CPP30216Superseded — equivalentCertificate III in Surveying and Spatial Information Services
equivalent
CPP30221Superseded — equivalentCertificate III in Surveying and Spatial Information Services
equivalent
CPP30226CurrentCertificate III in Surveying and Spatial Information Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPP30109CPP30111equivalent8 April 2011
The register records this supersession but attaches no note on what changed.
CPP30111CPP30112not equivalent26 November 2012
Overall number of units required for qualification remains unchanged, but core units reduced from 7 to 5 by moving the following two core units to the elective pool: CPPSIS3011A Apply map presentation principles and CPPSIS3002A Store and retrieve spatial data (which has however been replaced by CPPSIS4022A Store and retrieve spatial data). Changed outcome for some native CPP07 core units. Imported core unit updated. Native and imported elective units updated.

Official documents on the register

What training.gov.au lists for CPP30111 and for its training package CPP07 (release 15.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPP30111_R1.docxCPP30111 release 1 · product document · published 26 November 2024
CPP30111_R1.pdfCPP30111 release 1 · product document · published 20 July 2012

Is CPP30111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPP30111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPP30111 is made of

training.gov.au lists 23 units for CPP30111. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 23 listed

Code	Unit	Core or elective	In this product
BSBCUS301A	Deliver and monitor a service to customers	`N/A`	not current
BSBFLM303C	Contribute to effective workplace relationships	`N/A`	not current
BSBFLM312B	Contribute to team effectiveness	`N/A`	not current
CPPCMN3001B	Participate in environmentally sustainable work practices	`N/A`	not current
CPPSIS2001B	Prepare for work in the spatial information services industry	`N/A`	not current
CPPSIS3001A	Apply map presentation principles	`N/A`	not current
CPPSIS3002A	Store and retrieve basic spatial data	`N/A`	not current
CPPSIS3003A	Support spatial process improvement	`N/A`	not current
CPPSIS3004A	Respond to client spatial enquiry	`N/A`	not current
CPPSIS3005A	Collect basic spatial data	`N/A`	not current
CPPSIS3006A	Provide field support services	`N/A`	not current
CPPSIS3007A	Select, operate and maintain equipment and supplies	`N/A`	not current
CPPSIS3008A	Transfer personnel and loads	`N/A`	not current
CPPSIS3009A	Perform basic drafting	`N/A`	not current
CPPSIS3010A	Perform basic spatial computations	`N/A`	not current
CPPSIS4006A	Read and interpret basic image data	`N/A`	not current
CPPSIS4010A	Operate surveying equipment	`N/A`	not current
HLTFA301B	Apply first aid	`N/A`	not current
ICAU2006B	Operate computing packages	`N/A`	not current
MNQGEN300A	Apply risk management processes	`N/A`	not current
PRMCMN301A	Contribute to workplace safety arrangements	`N/A`	not current
RIIG005A	Read and interpret map	`N/A`	not current
TLIC2507B	Operate four wheel drive vehicle	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPP30111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.