CPP30112 Certificate III in Surveying and Spatial Information Services

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPP30112 ended on 4 May 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 6 May 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
CPP07 — Property Services Training Package
Currency period ends
4 May 2016
Latest release
Release 2 · 21 October 2021 · 2 releases in all
Supersedes
CPP30111
Superseded by
CPP30216 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPP30112Superseded — equivalentCertificate III in Surveying and Spatial Information Services
  2. equivalent
  3. CPP30216Superseded — equivalentCertificate III in Surveying and Spatial Information Services
  4. equivalent
  5. CPP30221Superseded — equivalentCertificate III in Surveying and Spatial Information Services
  6. equivalent
  7. CPP30226CurrentCertificate III in Surveying and Spatial Information Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPP30111CPP30112not equivalent26 November 2012

    Overall number of units required for qualification remains unchanged, but core units reduced from 7 to 5 by moving the following two core units to the elective pool: CPPSIS3011A Apply map presentation principles and CPPSIS3002A Store and retrieve spatial data (which has however been replaced by CPPSIS4022A Store and retrieve spatial data). Changed outcome for some native CPP07 core units. Imported core unit updated. Native and imported elective units updated.

  • CPP30112CPP30216equivalent5 May 2016

    Replaces superseded equivalent CPP30112 Certificate III in Surveying and Spatial Information Services.

Official documents on the register

What training.gov.au lists for CPP30112 and for its training package CPP07 (release 15.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPP30112_R2.docxCPP30112 release 2 · product document · published 26 November 2024
  • CPP30112_R2.pdfCPP30112 release 2 · product document · published 21 October 2021

Is CPP30112 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPP30112 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPP30112 is made of

training.gov.au lists 21 units for CPP30112: 4 core and 17 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
CPPCMN3003AContribute to workplace safety arrangementsnot current
CPPSIS3015ACollect spatial datanot current
CPPSIS3020APerform basic surveying computationsnot current
RIISTD201ARead and interpret mapsnot current

Elective units 17 listed

CodeUnitIn this product
BSBCUS301BDeliver and monitor a service to customersnot current
BSBFLM305CSupport operational plannot current
BSBFLM309CSupport continuous improvement systems and processesnot current
BSBPMG510AManage projectsnot current
CPPCMN3001BParticipate in environmentally sustainable work practicesnot current
CPPSIS2011APrepare for work in the spatial information services industrynot current
CPPSIS3011AApply map presentation principlesnot current
CPPSIS3016AProvide field support servicesnot current
CPPSIS3018ATransfer personnel and loadsnot current
CPPSIS3019APerform basic draftingnot current
CPPSIS4022AStore and retrieve spatial datanot current
CPPSIS4026ARead and interpret image datanot current
CPPSIS4030AOperate surveying equipmentnot current
HLTFA301CApply first aidnot current
ICAICT203AOperate application software packagesnot current
RIIRIS301BApply risk management processesnot current
TLIC2025AOperate four wheel drive vehiclenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPP30112 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.