When must new enrolments into CUF40607 stop?

New enrolments are not permitted from 15 January 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CUF40607?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CUF40607 Certificate IV in Scenery and Set Construction

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CUF40607Superseded — not equivalentCertificate IV in Scenery and Set Construction
not equivalent
CUA40415Superseded — not equivalentCertificate IV in Live Production and Technical Services
not equivalent
CUA40420Superseded — not equivalentCertificate IV in Live Production and Technical Services
not equivalent
CUA40425CurrentCertificate IV in Live Production and Technical Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CUE40103CUF40607equivalent13 November 2010
The register records this supersession but attaches no note on what changed.
CUF40607CUA40415not equivalent14 January 2016
Updated to meet Standards for Training Packages. Qualifications merged to remove duplication. Core units changed. Unit codes updated.

Is CUF40607 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CUF40607 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CUF40607 is made of

training.gov.au lists 54 units for CUF40607. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 54 listed

Code	Unit	Core or elective	In this product
BSBCMM401A	Make a presentation	`N/A`	not current
BSBCON401A	Work effectively in a business continuity context	`N/A`	not current
BSBCRT401A	Articulate, present and debate ideas	`N/A`	not current
BSBCRT402A	Collaborate in a creative process	`N/A`	not current
BSBDES402A	Interpret and respond to a design brief	`N/A`	not current
BSBDES403A	Develop and extend design skills and practice	`N/A`	not current
BSBINN301A	Promote innovation in a team environment	`N/A`	not current
BSBOHS407A	Monitor a safe workplace	`N/A`	not current
BSBPMG510A	Manage projects	`N/A`	not current
BSBREL401A	Establish networks	`N/A`	not current
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLRG3002A	Licence to perform rigging intermediate level	`N/A`	not current
CPCCLRG4001A	Licence to perform rigging advanced level	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CUECOS02C	Apply art finishing	`N/A`	not current
CUEIND01C	Source and apply entertainment industry knowledge	`N/A`	not current
CUEIND02B	Research and evaluate theatrical references to inform industry practice	`N/A`	not current
CUEPRP05B	Make prop furniture	`N/A`	not current
CUEPRP06B	Construct mechanical props	`N/A`	not current
CUEPRP07B	Make props using mixed media	`N/A`	not current
CUESCE04C	Use research, innovation and experimentation to produce scenic art	`N/A`	not current
CUESCE08B	Realise scenic art designs	`N/A`	not current
CUESET04C	Use research, innovation and experimentation to create props	`N/A`	not current
CUESET07C	Use research, innovation and experimentation to create sets	`N/A`	not current
CUESET11B	Develop set construction plans to meet design requirements	`N/A`	not current
CUESET17B	Develop props construction plans to meet design requirements	`N/A`	not current
CUESET302A	Make sets	`N/A`	not current

Show the remaining 24 units

Code	Unit	Core or elective	In this product
CUESTA01C	Install staging elements	`N/A`	not current
CUESTA06B	Apply a general knowledge of theatrical rigging	`N/A`	not current
CUETEM01C	Coordinate production operations	`N/A`	not current
CUETEM03C	Establish and manage production requirements and resources	`N/A`	not current
CUETEM06B	Organise and monitor bump in/bump out	`N/A`	not current
CUFIND301B	Work effectively in the screen and media industries	`N/A`	not current
CUFIND401A	Provide services on a freelance basis	`N/A`	not current
CUFPPM403A	Coordinate film and media production services and resources	`N/A`	not current
CUFPRP301A	Assemble and maintain props	`N/A`	not current
CUFRES401A	Conduct research	`N/A`	not current
CUFSFX301A	Maintain and repair special effects items	`N/A`	not current
CUFSFX401A	Create special effects items	`N/A`	not current
CUFSFX402A	Coordinate the logistics of special effects operations	`N/A`	not current
CUVCOR09B	Select and apply drawing techniques and media to represent and communicate the concept	`N/A`	not current
CUVCRS03B	Produce computer-aided drawings	`N/A`	not current
CUVCRS04B	Produce technical drawings	`N/A`	not current
CUVCRS06B	Make scale models	`N/A`	not current
CUVVSP27B	Produce jewellery	`N/A`	not current
CUVVSP28B	Research and experiment with techniques to produce jewellery	`N/A`	not current
CUVVSP55B	Produce textile/fibre work	`N/A`	not current
CUVVSP56B	Research and experiment with techniques to produce textile/fibre work	`N/A`	not current
CUVVSP58B	Produce wood objects	`N/A`	not current
CUVVSP59B	Research and experiment with techniques to produce wood objects	`N/A`	not current
TAADEL301B	Provide training through instruction and demonstration of work skills	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CUF training product on the register · Search all training products

Is CUF40607 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.