Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
FDF40210FBP40518≠not equivalent17 December 2018
Updated to meet Standards for Training Packages The number of units to achieve the qualification reduced from 21 to 16 Changes to packaging rules, core and elective units
FBP40518FBP40522≠not equivalent19 April 2022
Unit codes, including core unit, updated to reflect current codes
Is FBP40518 on your scope?
This page is the register's record of one product. What it cannot tell you is whether FBP40518 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What FBP40518 is made of
training.gov.au lists 59 units for FBP40518: 8 core and 51 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 8 listed
| Code | Unit | In this product |
|---|---|---|
| BSBSMB407 | Manage a small team | !not current |
| BSBWHS401 | Implement and monitor WHS policies, procedures and programs to meet legislative requirements | !not current |
| FBPPHM4001 | Monitor and maintain Good Manufacturing Practice requirements | ●current |
| FBPPHM4002 | Prepare and review workplace documentation to support Good Manufacturing Practice requirements | ●current |
| FBPPHM4003 | Facilitate contamination control | ●current |
| FBPPHM4005 | Participate in validation of pharmaceutical manufacturing processes | ●current |
| FBPPHM4006 | Respond to non-conformance | ●current |
| FBPPPL3006 | Report on workplace performance | ●current |
Elective units 51 listed
| Code | Unit | In this product |
|---|---|---|
| BSBHRM405 | Support the recruitment, selection and induction of staff | !not current |
| BSBINN301 | Promote innovation in a team environment | !not current |
| BSBLDR402 | Lead effective workplace relationships | !not current |
| BSBLDR403 | Lead team effectiveness | !not current |
| BSBLED401 | Develop teams and individuals | !not current |
| BSBMGT401 | Show leadership in the workplace | !not current |
| BSBMGT402 | Implement operational plan | !not current |
| BSBMGT403 | Implement continuous improvement | !not current |
| BSBRES411 | Analyse and present research information | !not current |
| BSBWOR403 | Manage stress in the workplace | !not current |
| BSBWOR404 | Develop work priorities | !not current |
| FBPOPR2069 | Use numerical applications in the workplace | ●current |
| FBPOPR3005 | Operate interrelated processes in a production system | !not current |
| FBPOPR3006 | Operate interrelated processes in a packaging system | !not current |
| FBPOPR4001 | Apply principles of statistical process control | ●current |
| FBPPHM3002 | Operate a pharmaceutical production process | !not current |
| FBPPHM3003 | Work in a controlled environment | ●current |
| FBPPHM3004 | Clean and sanitise facilities and equipment | ●current |
| FBPPHM4004 | Participate in change control procedures | ●current |
| FBPPPL3005 | Participate in an audit process | ●current |
| FBPPPL4002 | Plan and coordinate production equipment maintenance | ●current |
| FBPTEC4007 | Describe and analyse data using mathematical principles | ●current |
| FBPTEC4011 | Establish process capability | ●current |
| MSL922001 | Record and present data | !not current |
| MSMOPS400 | Optimise process/plant area | ●current |
| MSMPER300 | Issue work permits | ●current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSMSUP406 | Identify faults in electronic control | ●current |
| MSMWHS201 | Conduct hazard analysis | ●current |
| MSMWHS401 | Assess risk | ●current |
Show the remaining 21 elective units
| Code | Unit | In this product |
|---|---|---|
| MSS402080 | Undertake root cause analysis | !not current |
| MSS402083 | Use planning software systems in operations | !not current |
| MSS403010 | Facilitate change in an organisation implementing competitive systems and practices | !not current |
| MSS403011 | Facilitate implementation of competitive systems and practices | !not current |
| MSS403021 | Facilitate a Just in Time system | !not current |
| MSS403023 | Monitor a levelled pull system of operations | !not current |
| MSS403032 | Analyse manual handling processes | !not current |
| MSS403040 | Facilitate and improve implementation of 5S | !not current |
| MSS403041 | Facilitate breakthrough improvements | !not current |
| MSS403085 | Ensure process improvements are sustained | !not current |
| MSS403087 | Mistake proof an operational process | !not current |
| MSS404052 | Apply statistics to operational processes | !not current |
| MSS404053 | Use DMAIC techniques | !not current |
| MSS404060 | Facilitate the use of planning software systems in a work area or team | !not current |
| MSS404061 | Facilitate the use of SCADA systems in a team or work area | !not current |
| MSS404082 | Assist in implementing a proactive maintenance strategy | !not current |
| MSS404084 | Undertake process capability improvements | !not current |
| PMBTECH406 | Diagnose production equipment problems | !not current |
| TAEASS402 | Assess competence | !not current |
| TAEASS403 | Participate in assessment validation | !not current |
| TAEDEL301 | Provide work skill instruction | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every FBP training product on the register · Search all training products
Is FBP40518 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.