FDF10111 Certificate I in Food Processing

Supersededtraining.gov.au: supersededEquivalent

The currency period for FDF10111 ended on 21 January 2018 — 8 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 23 January 2019. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
FDF10 — Food Processing
Currency period ends
21 January 2018
Latest release
Release 2 · 6 September 2012 · 2 releases in all
Supersedes
FDF10110
Superseded by
FBP10117 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. FDF10111Superseded — equivalentCertificate I in Food Processing
  2. equivalent
  3. FBP10117Superseded — not equivalentCertificate I in Food Processing
  4. not equivalent
  5. FBP10121CurrentCertificate I in Food Processing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FDF10110FDF10111not equivalent3 November 2011

    The register records this supersession but attaches no note on what changed.

  • FDF10111FBP10117equivalent22 January 2018

    Updated to meet Standards for Training Packages Packaging Rules clarified to reflect delivery of this qualification for processing of food for non-human and human consumption Imported units updated or deleted

Official documents on the register

What training.gov.au lists for FDF10111 and for its training package FDF10 (release 4.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • FDF10111_R2.docxFDF10111 release 2 · product document · published 26 November 2024
  • FDF10111_R2.pdfFDF10111 release 2 · product document · published 7 September 2012

Is FDF10111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FDF10111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FDF10111 is made of

training.gov.au lists 23 units for FDF10111: 5 core and 18 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
FDFFS1001AFollow work procedures to maintain food safetynot current
FDFOHS1001AWork safelynot current
FDFOP1009AFollow work procedures to maintain qualitynot current
FDFOP1010ACommunicate workplace informationnot current
MSAENV272BParticipate in environmentally sustainable work practicesnot current

Elective units 18 listed

CodeUnitIn this product
FDFOP1001APack or unpack product manuallynot current
FDFOP1002AOperate automated washing equipmentnot current
FDFOP1003ACarry out manual handling tasksnot current
FDFOP1004APrepare basic mixesnot current
FDFOP1005AOperate basic equipmentnot current
FDFOP1006AMonitor process operationnot current
FDFOP1007AParticipate effectively in a workplace environmentnot current
FDFOP1008ATake and record basic measurementsnot current
FDFOP2061AUse numerical applications in the workplacenot current
FDFRB1001AFinish productsnot current
FDFWIN1001AIdentify key operations in wine productionnot current
FDFWIN1002AIdentify viticulture processesnot current
SIRXCCS201Apply point-of-sale handling proceduresnot current
SIRXCCS202Interact with customersnot current
SIRXICT001AOperate retail technologynot current
SIRXINV001APerform stock control proceduresnot current
SIRXSLS201Sell products and servicesnot current
TLIA2014AUse product knowledge to complete work operationsnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FDF training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is FDF10111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.